5秒后页面跳转
ADATE320 PDF预览

ADATE320

更新时间: 2024-09-29 01:12:51
品牌 Logo 应用领域
亚德诺 - ADI /
页数 文件大小 规格书
83页 2803K
描述
1.25 GHz Dual Integrated DCL

ADATE320 数据手册

 浏览型号ADATE320的Datasheet PDF文件第2页浏览型号ADATE320的Datasheet PDF文件第3页浏览型号ADATE320的Datasheet PDF文件第4页浏览型号ADATE320的Datasheet PDF文件第5页浏览型号ADATE320的Datasheet PDF文件第6页浏览型号ADATE320的Datasheet PDF文件第7页 
1.25 GHz Dual Integrated DCL with PPMU, Level  
Setting DACs, and On-Chip Calibration Registers  
Data Sheet  
ADATE320  
FEATURES  
GENERAL DESCRIPTION  
1.25 GHz, 2.5 Gbps data rate  
The ADATE320 is a complete, single-chip ATE solution that  
performs the pin electronics functions of a driver, comparator,  
and active load (DCL), and a four quadrant per pin parametric  
measurement unit (PPMU). Dedicated 16-bit digital-to-analog  
3-level driver with high-Z and reflection clamps  
Window and differential comparators  
25 mA active load  
Per pin parametric measurement unit (PMU) with a −1.5 V to  
+4.5 V range  
converters (DACs) with on-chip calibration registers provide all  
the necessary dc levels for operation of the device.  
Low leakage mode (typically <5 nA)  
Integrated 16-bit DACs with offset and gain correction  
1.2 W power dissipation per channel (ADATE320)  
1.3 W power dissipation per channel (ADATE320-1)  
Driver  
The driver features three active modes: high, low, and terminate, as  
well as a high impedance inhibit state. The inhibit state, in  
conjunction with the integrated dynamic clamps, facilitates  
significant attenuation of transmission line reflections when the  
driver is not actively terminating the line. The open-circuit drive  
capability is −1.5 V to +4.5 V to accommodate a standard range  
of ATE and instrumentation applications.  
Voltage range: −1.5 V to +4.5 V  
Precision trimmed termination: 50.0 Ω  
Unterminated swing: 50 mV minimum to 6.0 V maximum  
400 ps minimum pulse width, 1.0 V programmed swing  
25 ps deterministic jitter  
The ADATE320 can be used as a dual, single-ended pin  
electronics channel or as a single differential channel. In  
addition to per channel high speed window comparators, the  
ADATE320 provides a programmable threshold differential  
comparator for differential ATE applications.  
Comparator  
Differential and single-ended window modes  
100 ps equivalent input rise/fall time (ERT/EFT)  
250 mV current mode logic (CML) outputs (ADATE320)  
400 mV CML outputs (ADATE320-1)  
Load  
Per pin PMU (PPMU)  
Force voltage/compliance range: −1.5 V to +4.5 V  
5 current ranges  
40 mA, 1 mA, 100 μA, 10 µA, 2 µA  
Dedicated go/no-go comparators  
DC levels  
Fully integrated and dedicated 16-bit DACs  
On-chip gain and offset calibration registers with  
automatic add/multiply function  
84-lead, 10 mm × 10 mm LFCSP (0.4 mm pitch)  
All dc levels for DCL and PPMU functions are generated by  
dedicated, on-chip, 16-bit DACs. To facilitate the programming  
of accurate levels, the ADATE320 includes an integrated  
calibration function to correct for the gain and offset errors of  
each functional block. Correction coefficients can be stored on  
chip, and any values written to the DACs adjust automatically  
using the appropriate correction factors.  
The ADATE320 uses a serial programmable interface (SPI) bus  
to program all functional blocks, DACs, and on-chip calibration  
constants. It also has an on-chip temperature sensor and overvolt-  
age/undervoltage fault clamps that monitor and report the  
device temperature and any output pin or transient PPMU  
voltage faults that may occur during operation.  
APPLICATIONS  
The ADATE320 is available in two options. The standard option  
has high speed comparator outputs with 250 mV output swing.  
The ADATE320-1 has 400 mV output swing. See the Ordering  
Guide for more information.  
Automatic test equipment (ATE)  
Semiconductor/board test systems  
Instrumentation and characterization equipment  
Rev. B  
Document Feedback  
Information furnished by Analog Devices is believed to be accurate and reliable. However, no  
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other  
rightsof third parties that may result fromits use. Specifications subject to change without notice. No  
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.  
Trademarks andregisteredtrademarks are the property of their respective owners.  
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.  
Tel: 781.329.4700 ©2015–2016 Analog Devices, Inc. All rights reserved.  
Technical Support  
www.analog.com  
 
 
 

与ADATE320相关器件

型号 品牌 获取价格 描述 数据表
ADATE320-1KCPZ ADI

获取价格

1.25 GHz Dual Integrated DCL
ADATE320KCPZ ADI

获取价格

1.25 GHz Dual Integrated DCL
ADATE324 ADI

获取价格

1.6 GHz四通道集成DCL,内置VHH驱动功能、电平设置DAC和片内校准寄存器
ADATE334 ADI

获取价格

具有PPMU、电平设置DAC和片内校准寄存器的2.3 GHz双路集成DCL
ADAU1301 ADI

获取价格

Tape and Reel Packaging
ADAU1328 ADI

获取价格

2 ADC/8 DAC with PLL, 192 kHz, 24-Bit Codec
ADAU1328BSTZ ADI

获取价格

2 ADC/8 DAC with PLL, 192 kHz, 24-Bit Codec
ADAU1328BSTZ-RL ADI

获取价格

2 ADC/8 DAC with PLL, 192 kHz, 24-Bit Codec
ADAU1361 ADI

获取价格

Audio Codec with Integrated PLL
ADAU1361_17 ADI

获取价格

Audio Codec with Integrated PLL