Single-Supply, High Speed,
Triple Op Amp with Charge Pump
ADA4858-3
Data Sheet
FEATURES
CONNECTION DIAGRAM
ADA4858-3
Integrated charge pump
Supply range: 3 V to 5.5 V
Output range: −3.3 V to −1.8 V
50 mA maximum output current for external use at −3 V
High speed amplifiers
−3 dB bandwidth: 600 MHz
Slew rate: 600 V/µs
16 15 14 13
12
+IN2
+V
1
2
3
4
S
11 –IN2
C1_a
C1_b
CPO
CHARGE
PUMP
10 OUT2
0.1 dB flatness: 85 MHz
9
PD
0.1% settling time: 18 ns
Low power
5
6
7
8
Total quiescent current: 42 mA
Power-down feature
NOTES
High input common-mode voltage range
−1.8 V to +3.8 V at +5 V supply
Current feedback architecture
Differential gain error: 0.01%
Differential phase error: 0.02°
Available in 16-lead LFCSP
1. NC = NO CONNECT.
2. EXPOSED PAD, CONNECT TO GROUND.
Figure 1.
APPLICATIONS
Professional video
Consumer video
Imaging
Active filters
GENERAL DESCRIPTION
The ADA4858-3 (triple) is a single-supply, high speed current
feedback amplifier with an integrated charge pump that eliminates
the need for negative supplies to output negative voltages or output
a 0 V level for video applications. The 600 MHz, −3 dB bandwidth
and 600 V/µs slew rate make this amplifier well suited for many
high speed applications. In addition, its 0.1 dB flatness out to
85 MHz at G = 2, along with its differential gain and phase errors
of 0.01% and 0.02° into a 150 Ω load, make it well suited for
professional and consumer video applications.
This triple operational amplifier is designed to operate on
supply voltages of 3.3 V to 5 V, using only 42 mA of total
quiescent current, including the charge pump. To further
reduce the power consumption, it is equipped with a power-
down feature that lowers the total supply current to as low as
2.5 mA when the amplifier is not being used. Even in power-
down mode, the charge pump can be used to power external
components. The maximum output current for external use is
50 mA at −3 V. The amplifier also has a wide input common-
mode voltage range that extends from 1.8 V below ground to
1.2 V below the positive rail at a 5 V supply.
The ADA4858-3 is available in a 16-lead LFCSP, and it is designed
to work over the extended industrial temperature range of
−40°C to +105°C.
Rev. B
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2008–2012 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com