Single-Supply, Fixed G = 2, High Speed,
Video Amplifier with Charge Pump
ADA4859-3
Data Sheet
FEATURES
CONNECTION DIAGRAM
ADA4859-3
Integrated charge pump
Supply range: 3 V to 5.5 V
Output range: −3.3 V to −1.8 V
50 mA maximum output current at −3 V for external use
High speed amplifiers
16
15
14
13
−3 dB bandwidth: 195 MHz
Slew rate: 740 V/µs
0.1 dB gain flatness: 60 MHz
0.1% settling time: 20 ns
Low power
Total quiescent current: 38 mA
Power-down feature
12
+IN2
+V
1
2
3
4
S
11 –IN2
C1_a
C1_b
CPO
CHARGE
PUMP
10 OUT2
9
PD
High input common-mode voltage range
−1.8 V to +3.8 V at +5 V supply
Current feedback architecture
Differential gain error: 0.01%
Differential phase error: 0.02°
Available in 16-lead LFCSP
5
6
7
8
NOTES
1. NC = NO CONNECT.
2. EXPOSED PAD, CONNECT TO GROUND.
Figure 1.
APPLICATIONS
Professional video
Consumer video
Imaging
Active filters
GENERAL DESCRIPTION
The ADA4859-3 (triple) is a single-supply, high speed current
feedback amplifier with an integrated charge pump that eliminates
the need for negative supplies in order to output negative voltages
or output a 0 V level for video applications. The 195 MHz, large
signal −3 dB bandwidth at a fixed gain of 2, as well as the 740 V/µs
slew rate, make this amplifier ideal for high resolution professional
and consumer video applications. The amplifier also has a wide
input common-mode voltage range that extends from 1.8 V
below ground to 1.2 V below the positive rail at 5 V supply.
This triple video amplifier is designed to operate on supply
voltages of 3.3 V to 5 V, using only 38 mA total quiescent
current, including the charge pump. To further reduce the
power consumption, it is equipped with a power-down feature
that lowers the total supply current to as low as 2 mA when the
amplifier is not being used. Even in power-down mode, the
charge pump can be used to power external components. The
maximum output current for external use is 50 mA at −3 V.
The ADA4859-3 is available in a 16-lead LFCSP, and it is designed
to work over the industrial temperature range of −40°C to +105°C.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2008–2012 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com