Single Supply, High Speed,
Rail-to-Rail Output, Triple Op Amp
Data Sheet
ADA4855-3
FEATURES
CONNECTION DIAGRAM
Voltage feedback architecture
Rail-to-rail output swing: 0.1 V to 4.9 V
High speed amplifiers
16 15 14 13
410 MHz, −3 dB bandwidth, G = 1
210 MHz, −3 dB bandwidth, G = 2
Slew rate: 870 V/µs
53 MHz, 0.1 dB large signal flatness
5.3 ns settling time to 0.1% with 2 V step
High input common-mode voltage range
−VS − 0.2 V to +VS − 1 V
12
+V
NC
+IN2
NC
1
2
3
4
S
11 OUT2
10 –IN2
ADA4855-3
PD
9
+V
S
5
6
7
8
Supply range: 3 V to 5.5 V
NOTES
1. NC = NO CONNECT.
Differential gain error: 0.01%
Differential phase error: 0.01°
Low power
2. EXPOSED PAD CONNECTED TO –V .
S
Figure 1.
7.8 mA/amplifier typical supply current
Power-down feature
Available in 16-lead LFCSP
APPLICATIONS
Professional video
Consumer video
Imaging
Instrumentation
Base stations
Active filters
1
0
GENERAL DESCRIPTION
The ADA4855-3 (triple) is a single-supply, rail-to-rail output
operational amplifier. It provides excellent high speed performance
with 410 MHz, −3 dB bandwidth and a slew rate of 870 V/µs. It
has a wide input common-mode voltage range that extends from
0.2 V below ground to 1 V below the positive rail.In addition,
the output voltage swings within 100 mV of either supply rail,
making this rail-to-rail operational amplifier easy to use on single-
supply voltages as low as 3.3 V.
G = 1
–1
–2
–3
–4
–5
–6
G = 2
G = 5
The ADA4855-3 offers a typical low power of 7.8 mA per amplifier
and is capable of delivering up to 57 mA of load current. It also
features a power-down function for power sensitive applications
that reduces the supply current down to 1 mA.
1
10
100
1000
FREQUENCY (MHz)
Figure 2. Frequency Response
The ADA4855-3 is available in a 16-lead LFCSP and is designed
to work over the extended industrial temperature range of
−40°C to +105°C.
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2008–2013 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com