14-Output Clock Generator
AD9516-5
FEATURES
FUNCTIONAL BLOCK DIAGRAM
CP
Low phase noise, phase-locked loop (PLL)
External VCO/VCXO to 2.4 GHz optional
1 differential or 2 single-ended reference inputs
Reference monitoring capability
Automatic revertive and manual reference
switchover/holdover modes
REF1
REF2
STATUS
MONITOR
REFIN
REFIN
Accepts LVPECL, LVDS, or CMOS references to 250 MHz
Programmable delays in path to PFD
Digital or analog lock detect, selectable
Six 1.6 GHz LVPECL outputs, arranged in 3 groups
Each group shares a 1-to-32 divider with coarse phase delay
Additive output jitter: 225 fs rms
Channel-to-channel skew paired outputs of <10 ps
Four 800 MHz LVDS outputs, arranged in 2 groups
Each group has 2 cascaded 1-to-32 dividers with coarse
phase delay
CLK
CLK
DIVIDER
AND MUXes
OUT0
OUT1
OUT2
OUT3
OUT4
OUT5
OUT6
OUT7
OUT8
OUT9
DIV/Φ
DIV/Φ
DIV/Φ
DIV/Φ
DIV/Φ
LVPECL
LVPECL
LVPECL
∆t
∆t
∆t
∆t
DIV/Φ
DIV/Φ
LVDS/CMOS
LVDS/CMOS
Additive output jitter: 275 fs rms
SERIAL CONTROL PORT
AND
Fine delay adjust (Δt) on each LVDS output
Each LVDS output can be reconfigured as two 250 MHz
CMOS outputs
Automatic synchronization of all outputs on power-up
Manual output synchronization available
Available in 64-lead LFCSP
AD9516-5
DIGITAL LOGIC
Figure 1.
The AD9516-5 features six LVPECL outputs (in three pairs)
and four LVDS outputs (in two pairs). Each LVDS output can
be reconfigured as two CMOS outputs. The LVPECL outputs
operate to 1.6 GHz, the LVDS outputs operate to 800 MHz, and
the CMOS outputs operate to 250 MHz.
APPLICATIONS
Low jitter, low phase noise clock distribution
10/40/100 Gb/sec networking line cards, including SONET,
Synchronous Ethernet, OTU2/3/4
Forward error correction (G.710)
Clocking high speed ADCs, DACs, DDSs, DDCs, DUCs, MxFEs
High performance wireless transceivers
Each pair of outputs has dividers that allow both the divide ratio
and coarse delay (or phase) to be set. The range of division for
the LVPECL outputs is 1 to 32. The LVDS/CMOS outputs allow
a range of divisions up to a maximum of 1024.
ATE and high performance instrumentation
The AD9516-5 is available in a 64-lead LFCSP and can be
operated from a single 3.3 V supply. An external VCO, which
requires an extended voltage range, can be accommodated by
connecting the charge pump supply (VCP) to 5.5 V. A separate
LVPECL power supply can be from 2.375 V to 3.6 V (nominal).
GENERAL DESCRIPTION
The AD9516-51 provides a multi-output clock distribution function
with subpicosecond jitter performance, along with an on-chip PLL
that can be used with an external VCO/VCXO of up to 2.4 GHz.
The AD9516-5 is specified for operation over the industrial
range of −40°C to +85°C.
The AD9516-5 emphasizes low jitter and phase noise to
maximize data converter performance, and it can benefit other
applications with demanding phase noise and jitter requirements.
For applications requiring an integrated EEPROM, or needing
additional outputs, the AD9520-5 and AD9522-5 are available.
1 AD9516 is used throughout the data sheet to refer to all members of the AD9516
family. However, when AD9516-5 is used, it refers to that specific member of the
AD9516 family.
Rev. A
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.461.3113 ©2009–2011 Analog Devices, Inc. All rights reserved.