Quad, 8-Bit, 100 MSPS
Serial LVDS 1.8 V A/D Converter
AD9287
FUNCTIONAL BLOCK DIAGRAM
FEATURES
Four ADCs integrated into 1 package
133 mW ADC power per channel at 100 MSPS
SNR = 49 dB (to Nyquist)
ENOB = 7.85 bits
SFDR = 65 dBc (to Nyquist)
AVDD
PDWN
AD9287
T/H
DRVDD
DRGND
8
VIN + A
VIN – A
SERIAL
LVDS
D + A
D – A
PIPELINE
ADC
8
8
Excellent linearity
DNL = 0.2 LSB (typical)
INL = 0.2 LSB (typical)
Serial LVDS (ANSI-644, default)
Low power reduced signal option, IEEE 1596.3 similar
Data and frame clock outputs
295 MHz full power analog bandwidth
2 V p-p input voltage range
1.8 V supply operation
Serial port control
Full-chip and individual-channel power-down modes
Flexible bit orientation
VIN + B
VIN – B
PIPELINE
ADC
SERIAL
LVDS
D + B
D – B
T/H
T/H
T/H
VIN + C
VIN – C
SERIAL
LVDS
D + C
D – C
PIPELINE
ADC
8
VIN + D
VIN – D
SERIAL
LVDS
D + D
D – D
PIPELINE
ADC
VREF
FCO+
FCO–
SENSE
+
–
0.5V
DATA RATE
MULTIPLIER
REFT
REFB
REF
SELECT
SERIAL PORT
INTERFACE
DCO+
DCO–
Built-in and custom digital test pattern generation
Programmable clock and data alignment
Programmable output resolution
Standby mode
SCLK/DTP
RBIASAGND CSB SDIO/ODM
CLK+ CLK–
Figure 1.
capturing data on the output and a frame clock (FCO) for
signaling a new output byte are provided. Individual channel
power-down is supported and typically consumes less than
2 mW when all channels are disabled.
APPLICATIONS
Medical imaging and nondestructive ultrasound
Portable ultrasound and digital beam forming systems
Quadrature radio receivers
Diversity radio receivers
The ADC contains several features designed to maximize
flexibility and minimize system cost, such as programmable
clock and data alignment and programmable digital test pattern
generation. The available digital test patterns include built-in
deterministic and pseudorandom patterns, along with custom user-
defined test patterns entered via the serial port interface (SPI®).
Tape drives
Optical networking
Test equipment
GENERAL DESCRIPTION
The AD9287 is a quad, 8-bit, 100 MSPS analog-to-digital
converter (ADC) with an on-chip sample-and-hold circuit that
is designed for low cost, low power, small size, and ease of use.
The product operates at a conversion rate of up to 100 MSPS
and is optimized for outstanding dynamic performance and low
power in applications where a small package size is critical.
The AD9287 is available in a Pb-free, 48-lead LFCSP package. It is
specified over the industrial temperature range of −40°C to +85°C.
PRODUCT HIGHLIGHTS
1. Small Footprint. Four ADCs are contained in a small, space-
saving package; low power of 133 mW/channel at 100 MSPS.
The ADC requires a single 1.8 V power supply and LVPECL-/
CMOS-/LVDS-compatible sample rate clock for full performance
operation. No external reference or driver components are
required for many applications.
2. Ease of Use. A data clock output (DCO) is provided that
operates up to 400 MHz and supports double data rate
operation (DDR).
3. User Flexibility. Serial port interface (SPI) control offers a wide
range of flexible features to meet specific system requirements.
The ADC automatically multiplies the sample rate clock for the
appropriate LVDS serial data rate. A data clock (DCO) for
4. Pin-Compatible Family. This includes the AD9219 (10-bit),
AD9228 (12-bit), and AD9259 (14-bit).
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2006 Analog Devices, Inc. All rights reserved.