Octal LNA/VGA/AAF/ADC
and CW I/Q Demodulator
AD9279
FEATURES
GENERAL DESCRIPTION
8 channels of LNA, VGA, AAF, ADC, and I/Q demodulator
Low power: 141 mW per channel, TGC mode, 40 MSPS;
60 mW per channel, CW mode
10 mm × 10 mm, 144-ball CSP-BGA
TGC channel input-referred noise: 0.8 nV/√Hz, max gain
Flexible power-down modes
The AD9279 is designed for low cost, low power, small size,
and ease of use for medical ultrasound and automotive radar. It
contains eight channels of a variable gain amplifier (VGA) with
a low noise preamplifier (LNA), an antialiasing filter (AAF), an
analog-to-digital converter (ADC), and an I/Q demodulator
with programmable phase rotation.
Fast recovery from low power standby mode: <2 μs
Overload recovery: <10 ns
Low noise preamplifier (LNA)
Input-referred noise: 0.75 nV/√Hz, gain = 21.3 dB
Programmable gain: 15.6 dB/17.9 dB/21.3 dB
0.1 dB compression: 1000 mV p-p/
Each channel features a variable gain range of 45 dB, a fully
differential signal path, an active input preamplifier termination,
and a maximum gain of up to 52 dB. The channel is optimized
for high dynamic performance and low power in applications
where a small package size is critical.
The LNA has a single-ended-to-differential gain that is selectable
through the SPI. Assuming a 15 MHz noise bandwidth (NBW)
and a 21.3 dB LNA gain, the LNA input SNR is roughly 94 dB.
In CW Doppler mode, each LNA output drives an I/Q demod-
ulator that has independently programmable phase rotation
with 16 phase settings.
750 mV p-p/450 mV p-p
Dual-mode active input impedance matching
Bandwidth (BW): >100 MHz
Variable gain amplifier (VGA)
Attenuator range: −45 dB to 0 dB
Postamp gain (PGA): 21 dB/24 dB/27 dB/30 dB
Linear-in-dB gain control
Antialiasing filter (AAF)
Programmable second-order LPF from 8 MHz to 18 MHz
Programmable HPF
Analog-to-digital converter (ADC)
SNR: 70 dB, 12 bits up to 80 MSPS
Serial LVDS (ANSI-644, low power/reduced signal)
CW mode I/Q demodulator
Individual programmable phase rotation
Output dynamic range per channel: >160 dBc/√Hz
Output-referred SNR: 155 dBc/√Hz, 1 kHz offset, −3 dBFS
Power-down of individual channels is supported to increase
battery life for portable applications. Standby mode allows quick
power-up for power cycling. In CW Doppler operation, the
VGA, AAF, and ADC are powered down. The ADC contains
several features designed to maximize flexibility and minimize
system cost, such as a programmable clock, data alignment, and
programmable digital test pattern generation. The digital test
patterns include built-in fixed patterns, built-in pseudo random
patterns, and custom user-defined test patterns entered via the
serial port interface.
FUNCTIONAL BLOCK DIAGRAM
AVDD1 AVDD2
PDWN
STBY
DRVDD
LO-A TO LO-H
I/Q
DEMODULATOR
8 CHANNELS
LOSW-A TO LOSW-H
LI-A TO LI-H
DOUTA+ TO DOUTH+
DOUTA– TO DOUTH–
12-BIT
ADC
SERIAL
LVDS
LNA
VGA
AAF
LG-A TO LG-H
FCO+
FCO–
DCO+
DCO–
DATA
RATE
MULTIPLIER
SERIAL
PORT
INTERFACE
LO
REFERENCE
GENERATION
Figure 1.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2010 Analog Devices, Inc. All rights reserved.
5秒后页面跳转
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
纳微科技震撼发布GaNSlim革新氮化镓功率芯片
意法半导体发布第四代SiC技术，助力电动汽车电驱
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
