Low Voltage, Low Power,
aFactory-Calibrated 16-/24-Bit Dual ꢀ-ꢁ ADC
AD7719
FEATURES
APPLICATIONS
HIGH RESOLUTION ꢀ-ꢁ ADCs
Sensor Measurement
Temperature Measurement
Pressure Measurement
Weigh Scales
Portable Instrumentation
4 to 20 mA Transmitters
2 Independent ADCs (16- and 24-Bit Resolution)
Factory-Calibrated (Field Calibration Not Required)
Output Settles in 1 Conversion Cycle (Single
Conversion Mode)
Programmable Gain Front End
Simultaneous Sampling and Conversion of 2
Signal Sources
Separate Reference Inputs for Each Channel
Simultaneous 50 Hz and 60 Hz Rejection at 20 Hz
Update Rate
GENERAL DESCRIPTION
The AD7719 is a complete analog front end for low frequency
measurement applications. It contains two high resolution Σ-∆
ADCs, switchable matched excitation current sources, low-side
power switches, digital I/O port, and temperature sensor. The
24-bit main channel with PGA accepts fully differential, unipolar,
and bipolar input signal ranges from 1.024 × REFIN1/128 to
1.024 × REFIN1. Signals can be converted directly from a trans-
ducer without the need for signal conditioning. The 16-bit auxiliary
channel has an input signal range of REFIN2 or REFIN2/2.
ISOURCE Select™
24-Bit No Missing Codes—Main ADC
13-Bit p-p Resolution @ 20 Hz, 20 mV Range
18-Bit p-p Resolution @ 20 Hz, 2.56 V Range
INTERFACE
3-Wire Serial
SPI®, QSPI™, MICROWIRE™, and DSP Compatible
Schmitt Trigger on SCLK
The device operates from a 32 kHz crystal with an on-chip
PLL generating the required internal operating frequency. The
output data rate from the part is software programmable. The
peak-to-peak resolution from the part varies with the programmed
gain and output data rate.
POWER
Specified for Single 3 V and 5 V Operation
Normal: 1.5 mA Typ @ 3 V
Power-Down: 10 ꢂA (32 kHz Crystal Running)
The part operates from a single 3 V or 5 V supply. When oper-
ating from 3 V supplies, the power dissipation for the part is
4.5 mW with both ADCs enabled and 2.85 mW with only the
main ADC enabled in unbuffered mode. The AD7719 is housed
in 28-lead SOIC and TSSOP packages.
ON-CHIP FUNCTIONS
Rail-Rail Input Buffer and PGA
4-Bit Digital I/O Port
On-Chip Temperature Sensor
Dual Switchable Excitation Current Sources
Low-Side Power Switches
Reference Detect Circuit
FUNCTIONAL BLOCK DIAGRAM
DV
DD
REFIN1(+) REFIN1(–)
XTAL1 XTAL2
DGND
AV
DD
REFERENCE
DETECT
OSC. AND
PLL
IEXC1
200ꢂA
IEXC2
200ꢂA
AD7719
IOUT1
IOUT2
DOUT
DIN
SCLK
CS
RDY
RESET
SERIAL
INTERFACE
AND
CONTROL
LOGIC
AV
DD
MAIN CHANNEL
24-BIT ꢀ-ꢁ ADC
AIN1
AIN2
AIN3
AIN4
MUX1
MMUUXX2
PGA
BUF
AV
DD
AGND
I/O PORT
AIN5
AIN6
AUXILIARY CHANNEL
16-BIT ꢀ-ꢁ ADC
TEMP
SENSOR
AV
DD
AGND
REFIN2
PWRGND
P1/SW1 P2/SW2 P3
P4
REV. A
Information furnished by Analog Devices is believed to be accurate and
reliable. However, no responsibility is assumed by Analog Devices for its
use, norforanyinfringementsofpatentsorotherrightsofthirdpartiesthat
may result from its use. No license is granted by implication or otherwise
under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective companies.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781/329-4700
Fax: 781/326-8703
www.analog.com
© 2003 Analog Devices, Inc. All rights reserved.