Differential Input, Dual,
5 MSPS, 12-Bit, SAR ADC
AD7356
Preliminary Technical Data
FUNCTIONAL BLOCK DIAGRAM
FEATURES
Vdrive
Vdd
AD7356
Dual 12-bit SAR ADC
Simultaneous Sampling
12-BIT
SUCCESSIVE
APPROXIMATION
ADC
V
V
IN
A+
A-
SDATA
Throughput rate: 5 MSPS Per Channel
Specified for VDD of 2.5 V
No latency to 12 bits
A
T/H
IN
Power dissipation:
35 mW at 5 MSPS
On-chip reference:
2.048 V 0.5% max @ 25°C, 10ppm/°C
Dual conversion with read
High speed serial interface:
SPI®-/QSPI™-/MICROWIRE™-/DSP-compatible
−40°C to +125°C operation
Shutdown mode: 10 µA max
16-lead TSSOP package
BUF
BUF
SCLK
CS
CONTROL
LOGIC
REF
12-BIT
SUCCESSIVE
APPROXIMATION
ADC
V
IN
B+
T/H
V
IN
B-
SDATA
B
AGND
REFGND
AGND
DGND
Figure 1.
PRODUCT HIGHLIGHTS
GENERAL DESCRIPTION
The AD73561 is a dual, 12-bit, high speed, low power, successive
approximation ADC that operates from a single 2.5 V power supply
and features throughput rates up to 5 MSPS. The part contains two
ADCs, each preceded by a low noise, wide bandwidth track-and-
hold circuit that can handle input frequencies in excess of
200 MHz.
1. Two Complete ADC Functions Allow Simultaneous Sampling
and Conversion of Two Channels.
The conversion result of both channels is simultaneously
available on separate data lines or in succession on one data
line if only one serial port is available.
2. High Throughput with Low Power Consumption.
The AD7356 offers a 5 MSPS throughput rate with 35 mW
power consumption.
The conversion process and data acquisition use standard control
inputs allowing for easy interfacing to microprocessors or DSPs.
CS
The input signal is sampled on the falling edge of ; conversion is
3. The parts feature two standard successive approximation
ADCs with accurate control of the sampling instant via a
also initiated at this point. The conversion time is determined by
the SCLK frequency.
CS
input and once off conversion control.
The AD7356 uses advanced design techniques to achieve very low
power dissipation at high throughput rates. With 2.5 V supply and
a 5 MSPS throughput rate, the part consumes 14 mA typically. The
part also offers flexible power/throughput rate management when
operating in normal mode as the quiescent current consumption is
so low.
1 Protected by U.S. Patent No. 6,681,332
The analog input range for the parts is the differential common
mode +/- Vref/2. The AD7356 has an on-chip 2.048 V reference
that can be overdriven when an external reference is preferred.
The AD7356 is available in a 16-lead thin shrink small outline
package (TSSOP).
Rev. PrC
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rights of third parties that may result from its use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks and registeredtrademarks arethe property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
Fax: 781.461.3113
www.analog.com
©2006 Analog Devices, Inc. All rights reserved.