Single Supply, 24-Bit, Sigma-Delta ADC
with 10 V and 0 mA to 20 mA Inputs
Data Sheet
AD4112
FEATURES
GENERAL DESCRIPTION
Tested for robustness per: IEC61000-4-2, IEC61000-4-3,
IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, CISPR 11
24-bit ADC with integrated analog front end
Fast and flexible output rate: 1.25 SPS to 31.25 kSPS
Channel scan data rate of 6.21 kSPS per channel
(161 µs settling)
The AD4112 is a low power, low noise, 24-bit, sigma-delta (Σ-Δ)
analog-to-digital converter (ADC) that integrates an analog front
end (AFE) for fully differential or single-ended, high impedance
(≥1 MΩ) bipolar, 10 V voltage inputs, and 0 mA to 20 mA
current inputs.
The AD4112 also integrates key analog and digital signal
conditioning blocks to configure eight individual setups for
each analog input channel in use. The AD4112 features a
maximum channel scan rate of 6.21 kSPS (161 µs) for fully
settled data.
16 noise free bits at 1 kSPS per channel
85 dB rejection of 50 Hz and 60 Hz at 20 SPS per channel
10 V inputs, 4 differential or 8 single-ended
Pin absolute maximum rating 50 V
Overrange up to 20 V
The embedded 2.5 V, low drift (5 ppm/°C), band gap internal
reference (with output reference buffer) reduces the external
component count.
≥1 MΩ impedance
0.06% accuracy at 25°C
0 mA to 20 mA inputs, 4 single-ended
Pin absolute maximum rating 50 mA
Overrange from −0.5 mA to +24 mA
60 Ω impedance
0.08% accuracy at 25°C
On-chip 2.5 V reference
0.12% accuracy at 25°C, 5 ppm/°C (typical) drift
Internal or external clock
Power supplies
The digital filter allows flexible settings, including simultaneous
50 Hz and 60 Hz rejection at a 27.27 SPS output data rate. The
user can select between the different filter settings depending on
the demands of each channel in the application. The automatic
channel sequencer enables the ADC to switch through each
enabled channel.
The precision performance of the AD4112 is achieved by
integrating the proprietary iPassives™ technology from Analog
Devices, Inc. The AD4112 is factory calibrated to achieve a high
degree of specified accuracy.
AVDD = 3.0 V to 5.5 V
IOVDD = 2 V to 5.5 V
Total IDD = 3.9 mA
The AD4112 operates with a single power supply, making it easy to
use in galvanically isolated applications. The specified operating
temperature range is −40°C to +105°C. The AD4112 is housed
in a 40-lead, 6 mm × 6 mm LFCSP package.
Temperature range: −40°C to +105°C
3-wire or 4-wire serial digital interface (Schmitt trigger on SCLK)
SPI, QSPI, MICROWIRE, and DSP compatible
APPLICATIONS
Process control
PLC and DCS modules
Instrumentation and measurement
Rev. A
Document Feedback
Information furnished by Analog Devices is believed to be accurate and reliable. However, no
responsibility is assumed by Analog Devices for its use, nor for any infringements of patents or other
rightsof third parties that may result fromits use. Specifications subject to change without notice. No
license is granted by implication or otherwise under any patent or patent rights of Analog Devices.
Trademarks andregisteredtrademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700 ©2018–2019 Analog Devices, Inc. All rights reserved.
Technical Support
www.analog.com