ACT2804
Rev 2, Feb-04-2016
5V/3.4A Dual Cell Backup Battery Power Manager
Battery Over-charge and Over-discharge
FEATURES
Protections
Dedicated Single-chip Integrated Battery Power
Charge/Discharge Thermal Regulation
TQFN5x5-40 Package
Manager
Dual Cell Battery Charger with Cell Balancing
Management
APPLICATIONS
Auto Detection support USB BC1.2, Chinese
YD/T 1591-2009, Apple 2.4A, and Samsung
Devices
Backup Battery Pack
Power Bank
Mobile Power
Passed Apple MFi Test
Standalone Battery Charger with USB Output
4.5V-5.5V Input Voltage with 3.4A Input Current
Limit
GENERAL DESCRIPTION
2.4A+1.0A Dual Outputs with CC Regulation
ACT2804 is a space-saving and dedicated single-
chip solution for dual-cell battery charge and
discharge. It takes 5V USB input source to charge a
dual cell battery with boost configuration in three
phases: preconditioning, constant current, and
constant voltage. Charge is terminated when the
current reaches 10% of the fast charge rate. The
battery charger is thermally regulated at 110˚C with
charge current foldback.
5.07V+/-1% Output with Prioritized Power Path
from Input to Output
4.2V/4.35V +/- 0.5% Battery Charge Voltage
Accuracy of Each Cell
Output Plug-in Detection Wakeup and No Load
Detection Sleep Mode
Optimized Power Path and Battery Charge
Control
If input 5V is not present, ACT2804 discharge a
dual cell battery with buck configuration to provide
5.07V+/-1% to output ports. There is a power path
from input to output. The cycle-by-cycle peak
current mode control, constant current regulation,
short circuit protection and over voltage protection
maximize safe operation.
<10uA Low Battery Drainage Current
I2C Port for Optimal System Performance and
Status Reporting
Configurable Charge, Discharge and HZ modes
>92% Charge and Discharge Efficiency at 3.4A
Output for Full Battery Range
ACT2804 provides 4 LED drive pins for battery
capacity level and charge status indication to
indicate 25%, 50%, 75%, and 75% above battery
level with battery impedance compensation. The
LED indication patterns are programmable .
4 Modes of LED Operation
Preconditioning for Deeply Depleted Battery
Weak Input Sources Accommodation
Safety:
Input Over-voltage Protection
Nearly Zero Power Short Circuit Protection
Output Over-voltage Protection
ACT2804 is available in a thermally enhanced
5mmx5mm QFN55-40 package with exposed pad.
Buck Output CC/CV
1uF
6.0
22uF
LED4 LED3 LED2 LED1 VREG
22uF
BAT
BATS
BATP
VIN
VIN
5.0
4.5V-5.5V
22uF
25mΩ
CSN2
CSP
VBAT = 6.0V
25mΩ
510Ω
VOUT2
5.07V/2.4A
4.0
3.0
CSN1
ACT2804
25mΩ
VOUT1
BATC
CBD
VOUT
SW
4.7uH
5.07V/1A
PGND
VBAT = 8.2V
1A Output
2.4A Output
47Ω
47nF
HSB
BATN
2.0
22uF
22uF
510Ω
RIMC ICST
TH
PB AGND
1.0
0
540k
8k
10k
0
500
1000
1500
2000
2500
3000
Output Current (mA)
Innovative PowerTM
- 1 -
www.active-semi.com
Copyright © 2016 Active-Semi, Inc.