ACT2813/ACT2813C
Rev 2, 19-May-15
5V/2.4A Power Bank Solution
FEATURES
APPLICATIONS
• Power Bank
• Mobile Power
• Backup Battery Pack
• Standalone Battery Charger with USB Output
• Dedicated Single Chip Solution for Mobile Power
With Minimal Component Count
• 2.4A Continuous Output Current in Boost Mode
• 2.4A Switching Charger Current
• 96% Boost Efficiency (Vbat=4.1V)
• Adaptive to 10mA-2400mA Input Sources
• Battery Disconnection at Output Short
GENERAL DESCRIPTION
ACT2813/ACT2813C is a space-saving and high-
performance low-profile single-chip solution for
backup battery pack and standalone battery
charger. ACT2813/ACT2813C integrates all the
functions that a backup battery pack needs,
including switching charger, boost converter and
LED indication.
• <10µA Low Battery Leakage Current at HZ
Mode During Storage
• Boost Auto Turn-off at No Load and Push
Button Turn-on
• Battery Over Current, Over Voltage, Over
Temperature and Short Circuit Protections
ACT2813/ACT2813C operates at 1.1MHz for
switching charger and 0.55MHz for boost converter
allowing tiny external inductor and capacitors.
ACT2813/ACT2813C provides a direct power path
from input to output while providing power to
switching charger. Output has higher priority than
battery charger if the input current limit is reached.
• Boost Auto Startup with Load Detection
• Prioritized Power Path from Input to Output
• 5V+/-100mV Output Voltage in Boost Mode
• 1.1MHz/0.55MHz Switching Frequencies
• 2.2uH Inductor and Low Profile Ceramic
Capacitor
ACT2813/ACT2813C charges battery with full cycle
of preconditioning, fast charge with constant current
and constant voltage until end of charge. The
battery charger is thermally regulated at 110°C with
charge current foldback.
• 4 LEDs Battery Level and Status Indication
• Battery Impedance Compensation
• Full Cycle of Battery Charge Management
Preconditioning, Fast Charge, Top off and End
of Charge
ACT2813/ACT2813C boost converter steps battery
voltage up to 5V. Boost converter features high
efficiency, constant current regulation, short circuit
protection and over voltage protection.
• Charge Current Foldback at 110°C Die
Temperature
• IC Over Temperature Protection at 160°C
• FCQFN 4x4-20 Package
ACT2813/ACT2813C provides 3.5mA constant
currents to drive 4 LEDs to indicate battery level
and charge status. Battery impedance is
compensated for battery level indication.
Boost CC/CV Profile
5.5
VBAT =3.2V
5.0
VBAT =3.7V
4.5
4.0
VBAT =4.1V
3.5
3.0
0
0.4
0.8
1.2
1.6
2.0
2.4
2.8
Output Current (A)
Innovative PowerTM
- 1 -
www.active-semi.com
Copyright © 2015 Active-Semi, Inc.