A7335
DC-DC CONVERTER BUCK (STEP-DOWN)
30V, 3.5A SYNCHRONOUS CV/CC
AiT Semiconductor Inc.
www.ait-ic.com
PIN DESCRIPTION
Top View
Pin #
1
Symbol
BS
Function
High Side Bias Pin. This provides power to the internal high-side MOSFET
gate driver.
Connect a 100nF capacitor from BS pin to SW pin.
Power Supply Input. Bypass this pin with a minimum 4.7μF ceramic
capacitor to GND, placed as close to the IC as possible.
Power Switching Output to External Inductor.
2
3
IN
SW
Ground. Connect this pin to a large PCB copper area for best heat
dissipation. Return FB, COMP, and ISET to this GND, and connect this
GND to power GND at a single point for best noise immunity.
Feedback Input. The voltage at this pin is regulated to 0.808V. Connect to
the resistor divider between output and GND to set the output voltage.
Error Amplifier Output. This pin is used to compensate the converter.
Enable Input. EN is pulled up to 5V with a 2MΩ resistance, and contains a
precise 1.95V logic threshold. Drive this pin to a logic-high or leave
unconnected to enable the IC.
4
GND
5
6
FB
COMP
7
EN
Drive to a logic-low to disable the IC and enter shutdown mode.
Output Current Setting Pin. Connect a resistor from ISET to GND to
program the output current.
8
9
ISET
Heat Dissipation Pad. Connect this exposed pad to large ground copper
area with copper and vias.
Exposed Pad
REV1.0
- NOV 2017 RELEASED -
- 2 -