Fully Managed Industrial Ethernet Switch
All Gigabit, SNMP, Modbus/TCP
Models SEG510-2SFP-T, SEG512-4SFP-T, SEG520-4SFP-T
www.advantech-bb.com
Features & Benefits
• 8-port 10/100/1000 Mbps + 2-port Gigabit Combo (RJ45 or SFP) Uplink
• 8-port or 16-port 10/100/1000 Mbps + 4-port Gigabit SFP Uplink
• Full suite of Layer 2 functionality and advanced diagnostic tools
• Energy Efficient Ethernet (EEE), IEEE 802.3az for low energy consumption
• Jumbo Frame support, up to 9,216 bytes
• IXM™ function enables the cross management for fast deployment
• X-Ring™ function offers self-healing recovery time less than 20 ms
• Redundant Power Inputs (8.4 - 57.6 VDC)
• Wide Temperature Range -40 to 75°C
• EMS Level 3 Radiated/Conducted noise protection
• Designed for UL508 (Industrial Control Panel), NEMA TS2 (Traffic Control),
EN50121-4 (Rail Signal Control)
SEG510-2SFP-T
SEG520-4SFP-T
SEG512-4SFP-T
Outstanding L2 Managed Feature Design
Introduction
The SE500 series is a fully managed Ethernet switch with industrial,
ruggedized features designed to work in harsh environment applications.
This switch offers all the features expected in a managed switch such as
VLAN, IGMP Snooping, Network Redundancy, Link Aggregation, SNMP
V1,V2c,V3, Web and Telnet support. Comprehensive network security
features such as SSH, HTTPS/SSL, TLS, TTLS, PEAP and Radius are
also offered. Comprehensive network security features such as SSH,
HTTPS/SSL, TLS, TTLS, PEAP and Radius are also offered.
IEEE802.3az – Energy-Efficient Ethernet (EEE) is a set of enhancements to the twisted-
pair and backplane Ethernet family of computer networking standards that allows for less
power consumption during periods of low data activity.
IXM™ – Offers auto synchronization function of both firmware and configuration settings to
make middle/large-scale deployment of multiple switches fast and easy. A built- in Web
GUI feature, no need for extra software to be installed on a computer.
X-Ring™ – Sub-20ms self-healing/ring recovery technology. X-Ring™ supports different
topology options and allows different ring healing methods to coexist in one switch -
Couple Ring, Dual Homing and Multi-couple Ring - reduce redundant network cabling and
planning costs and ensure high reliability of your industrial network applications.
Multiple Account Access – This feature allows the network manager to create user
accounts with differing permissions. User ID’s can be created with a wide variety of
access - from simple device monitoring to full maintenance accessibility, thus ensuring
security and offering flexibility for field deployment.
IPv6 – A future-proof feature, IPv6 (Internet Protocol version 6) is a set of specifications
from the Internet Engineering Task Force (IETF) that is an upgrade of existing IP version
4 (IPv4). The basics of IPv6 are similar to those of IPv4 - devices can use IPv6 as source
and destination addresses to pass packets over a network.
Embedded into each switch is the industry leading eWorx IXM™ cross
management technology. IXM allows the installer to auto-synchronize
firmware updates and push configuration settings to either individual
or groups of switches. IXM provides maintenance and provisioning
functionality to both the SE500 and SE300 family switches without the
need of extra software or trained personal. IXM speeds up switch
deployment and ensures network stability.
IGMP Snooping – The Internet Group Management Protocol is a feature that allows the
managed switch to forward and filter multicast traffic intelligently, designed for the video
streaming and automation control network applications.
DDM – Digital-diagnostic-monitoring (also known as "digital optical monitoring" or DOM)
provides a user with critical information concerning the status of transmitted and received
signals. This approach allows for better fault isolation and error detection.
Cable Diagnostics – This feature will enable you to verify the length of a cable right
from the switch to the other end. This is essential in diagnosing faults as a break in the
cable can be easily identified on a single wire within the cable, as well as shorts and
crossed-pairs.
Dual Image – Considering possible failures during FW upgrades, such as power failure
or human error, dual image provides a backup image in case the system can’t boot up
through the primary image. The system automatically switches to the backup image to
reduce downtime.
Embedded Watchdog Timer – This feature, embedded into our managed switches,
when the user cannot easily access the field switch or would be unable to react to faults in
a timely manner. It’s used to detect and recover from switch malfunctions.
Ease of Use – 10/100BaseTX or 10/100/1000Mbps ports are auto sensing and auto
configuring. Each copper port is automatically negotiated for maximum speed and
performance by default, but can also be configured individually via the user interface.
A powerful inside processor allows wire speed capability on all.
The eWorx SE500 series switches feature a powerful suite of diagnostic,
monitoring and network performance capabilities: Cable diagnostics, IPv4/
IPv6 ping, fiber SFP monitoring (DDMI), port utilization, traffic statistics,
QoS and rate limiting - all available from the Web GUI. These advanced
features offer quick and easy troubleshooting.
Specifications
INTERFACE
8 x RJ45 + 2 x (RJ45/SFP) combo ports (Model SEG510-
2SFP-T)
8 x RJ45 + 4 x SFP ports (Model SEG512-4SFP-T)
Connectors
16 x RJ45 + 4 x SFP ports (Model SEG520-4SFP-T)
1 x RS-232 console port (RJ45 connector)
1 x Reset bottom
6-pin removable screw terminal (power & relay)
Auto Sensing, 10/100BaseTX, 10/100/1000BaseTX, Duplex
and MDIX
Ethernet
PWR1, PWR2, SYS, Alarm and R.M.
10/100/1000 T(X): Link/Activity, Speed
Gigabit Copper: Link/Activity, Speed
SFP: Link/Activity
LED Indicators
All product specifications are subject to change without notice.
SEC500 series 1000 GB-SFP_5016ds
orders@advantech-bb.com
support@advantech-bb.com
Corporate Headquarters: 707 Dayton Road, PO Box 1040 Ottawa, IL 61350 USA 815-433-5100 Fax 433-5104
European Office: Westlink Commercial Park, Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
5秒后页面跳转
LTM4644/LTM4644-1：创新的四输出同步降压微模块调节器
2N3500：一款多用途NPN硅晶体管的全面解析
最详细资料解析：BA5917AFP参数说明、引脚说明
MAX232IDR数据手册：产品特性、电气参数、替代型号推荐
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
