TVS Diodes
Surface Mount – 5000W > 5.0SMDJ series
8000W > 8.0SMDJ series
Pb e3
8.0SMDJ Series
RoHS
Description
Uni-directional
The 8.0SMDJ series is designed specifically to protect
sensitive electronic equipment from voltage transients
induced by lightning and other transient voltage events.
Bi-directional
Features
• For surface mounted
applications to optimize
board space
• compact size with high
power density in DO-
214AB Package
• Low profile package
• Low incremental surge
resistance
• Typical IR less than 5μA
when VBR min>22V
•Typical failure mode is
short from over-specified
voltage or current
Agency Recognitions
AGENCY
AGENCY FILE NUMBER
E230531
• Whisker test is conducted • High temperature reflow
based on JEDEC
JESD201A per its table 4a
and 4c
• IEC-61000-4-2 ESD
30kV(Air), 30kV (Contact)
• ESD protection of data
lines in accordance with
IEC 61000-4-2
• EFT protection of data
lines in accordance with
IEC 61000-4-4
• Built-in strain relief
• Glass passivated chip
junction
soldering guaranteed:
260°C/40sec
• VBR @TJ= VBR@25°C
x (1+αT x (TJ - 25))
(αT:Temperature
Coefficient, typical value
is 0.1%)
• UL Recognized compound
meeting flammability
rating V-0
Maximum Ratings andThermal Characteristics
(TA=25OC unless otherwise noted)
Parameter
Symbol
PPPM
Value
8000
Unit
W
Peak Pulse Power Dissipation at
TL=25OC by 10/1000μs Waveform
(Fig.2)(Note 1), (Note 2)
• Meet MSL level1, per
J-STD-020, LF maximun
peak of 260°C
Power Dissipation on Infinite Heat
Sink atTL=50OC
PD
6.5
W
A
Peak Forward Surge Current, 8.3ms
Single Half Sine Wave (Note 3)
IFSM
300
• Matte tin lead–free plated
• Halogen free and RoHS
compliant
Maximum Instantaneous Forward
Voltage at 100A for Unidirectional
Only
• 8kW peak pulse power
capability at 10/1000μs
VF
5.0
V
waveform, repetition rate • Pb-free E3 means 2nd level
OperatingTemperature Range
StorageTemperature Range
TJ
-65 to 150
-65 to 175
°C
°C
(duty cycles):0.01%
interconnect is Pb-free
and the terminal finish
material is tin(Sn) (IPC/
JEDEC J-STD-609A.01)
TSTG
• Fast response time:
typically less than 1.0ps
from 0V to VBR min
• Excellent clamping
capability
TypicalThermal Resistance Junction
to Lead
15
75
°C/W
°C/W
RθJL
RθJA
TypicalThermal Resistance Junction
to Ambient
Notes:
1. Non-repetitive current pulse , per Fig. 4 and derated aboveTJ (initial) =25OC per Fig. 3.
2. Mounted on copper pad area of 0.31x0.31” (8.0 x 8.0mm) to each terminal.
3. Measured on 8.3ms single half sine wave or equivalent square wave for unidirectional
component only,duty cycle=4 per minute maximum.
Applications
Functional Diagram
TVS components are ideal for the protection of I/O
Interfaces, VCC bus and other vulnerable circuits used in
Telecom, Computer, Industrial and Consumer electronic
applications.
Bi-directional
Cathode
Anode
Uni-directional
©2019 Littelfuse, Inc.
Specifications are subject to change without notice.
Revised: 06/10/19