5秒后页面跳转
8-1393298-1 PDF预览

8-1393298-1

更新时间: 2024-09-18 01:14:47
品牌 Logo 应用领域
泰科 - TE 光电二极管继电器
页数 文件大小 规格书
4页 379K
描述
Pin assignment similar to ISO 7588 part 1

8-1393298-1 技术参数

是否Rohs认证: 符合生命周期:Obsolete
Reach Compliance Code:unknownECCN代码:EAR99
风险等级:5.82主体宽度:28 mm
主体高度:25.5 mm主体长度或直径:28 mm
最大线圈电流(直流):0.067 A线圈工作电压(直流):14.4 V
线圈功率:1600 mW线圈释放电压(直流):2.4 V
线圈电阻:360 Ω最大线圈电压(直流):24 V
线圈/输入电源类型:DC电气寿命:100000 Cycle(s)
安装特点:PANEL MOUNT工作时间:7 ms
最高工作温度:125 °C最低工作温度:-40 °C
包装方法:BULK物理尺寸:28mm x 28mm x 25.5mm
参考标准:EIA; EN; IEC继电器动作:MOMENTARY
继电器功能:SPDT继电器类型:POWER/SIGNAL RELAY
释放时间:2 ms密封:IP54
表面贴装:NO端接类型:QUICK CONNECT
Base Number Matches:1

8-1393298-1 数据手册

 浏览型号8-1393298-1的Datasheet PDF文件第2页浏览型号8-1393298-1的Datasheet PDF文件第3页浏览型号8-1393298-1的Datasheet PDF文件第4页 
Automotive Relays  
Plug-in Mini ISO Relays  
VF4A (Standard, Shrouded and Weatherproof)  
Pin assignment similar to ISO 7588 part 1  
Plug-in terminals  
Customized versions on request  
– Integrated components (e.g. resistor, diode)  
– Customized marking  
– Special covers (e.g. brackets, shrouded)  
Typical applications  
Cross carline up to 40A for example: ABS control, blower fans, car alarm,  
cooling fan, Electric Power Steering, energy management, engine control,  
fuel pump, heated front screen, lamps: front, rear, fog light, main switch/  
supply relay, valves, wiper control.  
FVF4Aco_fcw1_bw  
Contact Data  
Contact Data (continued)  
Contact arrangement  
Rated voltage  
1 form C, 1 CO  
12VDC  
Mechanical endurance  
>1x106 ops.  
1) The values apply to a resistive or inductive load with suitable spark suppression and  
at maximum 14VDC for 12VDC or 28VDC for 24VDC load voltages. For a load current  
duration of maximum 3s for a make/break ratio of 1:10.  
2) Current and time are compatible with circuit protection by a typical automotive fuse.  
Relay will make, carry and break the specified current.  
3) See chapter Diagnostics of Relays in our Application Notes or consult the internet at  
http://relays.te.com/appnotes/  
4) For unsuppressed relay coil. A low resistive suppression device in parallel to the relay  
coil increases the release time and reduces the lifetime caused by increased erosion  
and/or higher risk of contact tack welding.  
Limiting continuous current,  
form A/form B  
23°C  
85°C  
125°C  
NO/NC  
60/45A  
40/30A  
17/12A  
120/45A  
60/40A  
Limiting making current1), form A/form B  
Limiting breaking current, form A/form B  
Limiting short-time current  
overload current, ISO 8820-32)  
1.35 x 40A, 1800s  
2.00 x 40A, 60s  
6.00 x 40A, 1s  
Coil Data  
Rated coil voltage  
12/24VDC  
Jump start test, ISO 16750-1  
24VDC for 5min,  
conducting nominal current at 23°C  
silver based  
Coil versions, DC coil  
Contact material  
Coil  
code  
Rated  
voltage  
VDC  
12  
Operate  
voltage  
VDC  
7.2  
14.4  
Release  
voltage  
VDC  
1.2  
2.4  
Coil  
resistance5)  
Ω 10ꢀ  
90  
Rated coil  
power5)  
W
Min. recommended contact load3)  
Initial voltage drop at 10A,  
1A at 5VDC  
form A (NO) contact, typ./max.  
form B (NC) contact, typ./max.  
Frequency of operation at nominal load  
Operate/release time typ.  
Electrical endurance  
resistive load, form A (NO) contact  
resistive load, form B (NC) contact  
15mW/200mV  
20mW/250mV  
6 ops./min (0.1Hz)  
7/2ms4)  
F
1.6  
1.6  
H
24  
360  
5) Without components in parallel.  
All figures are given for coil without pre-energization, at ambient temperature +23°C.  
>1x105 ops.  
40A, 14VDC  
30A, 14VDC  
Coil operating range  
TEVF4_OVR1  
Max. DC load breaking capacity  
Does not take into account the temperature rise due to the contact current  
E = pre-energization.  
Load limit curve 1: arc extinguishes during transit time (changeover contact).  
Load limit curve 2: safe shutdown, no stationary arc (make contact).  
Load limit curves measured with low inductive resistors verified for 1000 switching events.  
1
01-2016, Rev. 0116  
www.te.com  
© 2016 TE Connectivity.  
Datasheets and product specification ac-  
cording to IEC 61810-1 and to be used only  
together with the ‘Definitions’ section.  
Datasheets and product data is subject to the  
terms of the disclaimer and all chapters of  
the ‘Definitions’ section, available at  
http://relays.te.com/definitions  
Datasheets, product data, ‘Definitions’ sec-  
tion, application notes and all specifications  
are subject to change.  

与8-1393298-1相关器件

型号 品牌 获取价格 描述 数据表
8-1393298-8 TE

获取价格

Pin assignment similar to ISO 7588 part 1
8-1393305-4 MACOM

获取价格

Power Relay F4 / VF4 Plug-In Relays Mini ISO relays
8-1393305-7 TE

获取价格

Pin assignment similar to ISO 7588 part 1
8-1393485-3 TE

获取价格

THIS DRAWING IS A CONTROLLED DOCUMENT.
8-1393485-7 TE

获取价格

THIS DRAWING IS A CONTROLLED DOCUMENT.
8-1393485-8 TE

获取价格

THIS DRAWING IS A CONTROLLED DOCUMENT.
8-1393485-9 TE

获取价格

THIS DRAWING IS A CONTROLLED DOCUMENT.
8-1393486-6 TE

获取价格

THIS DRAWING IS A CONTROLLED DOCUMENT.
8-1393640-0 ETC

获取价格

IEC Connectors
8-1393640-5 ETC

获取价格

IEC Connectors