February 2001
Revised May 2005
74LCX162373
Low Voltage 16-Bit Transparent Latch
with 5V Tolerant Inputs and Outputs
and 26: Series Resistor
General Description
Features
■ 5V tolerant inputs and outputs
The LCX162373 contains sixteen non-inverting latches
with 3-STATE outputs and is intended for bus oriented
applications. The device is byte controlled. The flip-flops
appear transparent to the data when the Latch Enable (LE)
is HIGH. When LE is LOW, the data that meets the setup
time is latched. Data appears on the bus when the Output
Enable (OE) is LOW. When OE is HIGH, the outputs are in
a high impedance state.
■ 2.3V–3.6V VCC specifications provided
■ Equivalent 26 series resistor outputs
■ 6.2 ns tPD max (VCC 3.3V), 20 A ICC max
■ Power down high impedance inputs and outputs
■ Supports live insertion/withdrawal (Note 1)
■
12 mA output drive (VCC 3.0V)
The LCX162373 is designed for low voltage (2.5V or 3.3V)
■ Implements patented noise/EMI reduction circuitry
■ Latch-up performance exceeds 500 mA
■ ESD performance:
V
CC applications with capability of interfacing to a 5V signal
environment. The 26 series resistor in the output helps
reduce output overshoot and undershoot.
The LCX162373 is fabricated with an advanced CMOS
technology to achieve high speed operation while maintain-
ing CMOS low power dissipation.
Human body model 2000V
Machine model 200V
■ Also packaged in plastic Fine-Pitch Ball Grid Array
(FBGA) (Preliminary)
Note 1: To ensure the high-impedance state during power up or down, OE
should be tied to V
through a pull-up resistor: the minimum value or the
CC
resistor is determined by the current-sourcing capability of the driver.
Ordering Code:
Order Number
Package Number
Package Description
74LCX162373GX
(Note 2)
BGA54A
(Preliminary)
54-Ball Fine-Pitch Ball Grid Array (FBGA), JEDEC MO-205, 5.5mm Wide
[TAPE and REEL]
74LCX162373MEA
(Note 3)
MS48A
MTD48
48-Lead Small Shrink Outline Package (SSOP), JEDEC MO-118, 0.300" Wide
74LCX162373MTD
(Note 3)
48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide
Note 2: BGA package available in Tape and Reel only.
Note 3: Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Logic Symbol
© 2005 Fairchild Semiconductor Corporation
DS500443
www.fairchildsemi.com