74HC237
3-to-8 line decoder, demultiplexer with address latches
Rev. 8 — 26 October 2021
Product data sheet
1. General description
The 74HC237 is a 3-to-8 line decoder, demultiplexer with latches at the three address inputs (An).
The 74HC237 essentially combines the 3-to-8 decoder function with a 3-bit storage latch. When
the latch is enabled (LE = LOW), the 74HC237 acts as a 3-to-8 active LOW decoder. When the
latch enable (LE) goes from LOW-to-HIGH, the last data present at the inputs before this transition,
is stored in the latches. Further address changes are ignored as long as LE remains HIGH. The
output enable input (E1 and E2) controls the state of the outputs independent of the address inputs
or latch operation. All outputs are HIGH unless E1 is LOW and E2 is HIGH. The 74HC237 is ideally
suited for implementing non-overlapping decoders in 3-state systems and strobes (stored address)
applications in bus-oriented systems.
2. Features and benefits
•
Combines 3-to-8 decoder with 3-bit latch
•
•
•
•
•
•
•
Multiple input enable for easy expansion or independent controls
Active HIGH mutually exclusive outputs
Wide supply voltage range from 2.0 V to 6.0 V
CMOS low power dissipation
High noise immunity
Latch-up performance exceeds 100 mA per JESD 78 Class II Level B
Complies with JEDEC standards:
•
•
JESD8C (2.7 V to 3.6 V)
JESD7A (2.0 V to 6.0 V)
•
•
ESD protection:
•
•
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V
•
•
Multiple package options
Specified from -40 °C to +85 °C and from -40 °C to +125 °C
3. Ordering information
Table 1. Ordering information
Type number Package
Temperature range Name
Description
Version
74HC237D
-40 °C to +125 °C
SO16
plastic small outline package; 16 leads;
body width 3.9 mm
SOT109-1
74HC237DB -40 °C to +125 °C
74HC237PW -40 °C to +125 °C
SSOP16
TSSOP16
plastic shrink small outline package; 16 leads;
body width 5.3 mm
SOT338-1
SOT403-1
plastic thin shrink small outline package; 16 leads;
body width 4.4 mm