54ACT283

更新时间： 2024-11-14 22:56:11

品牌	Logo	应用领域
美国国家半导体 - NSC		/
页数	文件大小	规格书
8页	188K
描述
4-Bit Binary Full Adder with Fast Carry

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

54ACT283 数据手册

September 1998

54ACT283

4-Bit Binary Full Adder with Fast Carry

General Description

Features

n Guaranteed 4000V minimum ESD protection

n Outputs source/sink 24 mA

n TTL-compatible inputs

The ’ACT283 high-speed 4-bit binary full adder with internal

carry lookahead accepts two 4-bit binary words (A₀–A₃,

B₀–B₃) and a Carry input (C₀). It generates the binary Sum

outputs (S₀–S₃) and the Carry output (C₄) from the most sig-

nificant bit. The ’ACT283 will operate with either active HIGH

or active LOW operands (positive or negative logic).

n Available to Mil-Std-883

Logic Symbols

Pin Assignment for LCC

DS100977-1

IEEE/IEC

DS100977-3

Functional Description

The ’ACT283 adds two 4-bit binary words (A plus B) plus the

incoming Carry (C₀). The binary sum appears on the Sum

(S₀–S₃) and outgoing carry (C₄) outputs. The binary weight

of the various inputs and outputs is indicated by the subscript

numbers, representing powers of two.

2⁰(A₀+ B₀+ C₀) + 2¹(A₁+ B₁)

+ 2²(A₂+ B₂) + 2³(A₃+ B₃)

S₀+ 2S₁+ 4S₂+ 8S₃+ 16C₄

Where (+) plus

DS100977-4

Interchanging inputs of equal weight does not affect the op-

eration. Thus C₀, A₀, B₀can be arbitrarily assigned to pins 5,

6 and 7 for DIPS, and 7, 8 and 9 for chip carrier packages.

Due to the symmetry of the binary add function, the ’ACT283

can be used either with all inputs and outputs active HIGH

(positive logic) or with all inputs and outputs active LOW

(negative logic). See Figure 1. Note that if C₀is not used it

must be tied LOW for active HIGH logic or tied HIGH for ac-

tive LOW logic.

Connection Diagrams

Pin Assignment

for DIP and Flatpak

Due to pin limitations, the intermediate carries of the

’ACT283 are not brought out for use as inputs or outputs.

However, other means can be used to effectively insert a

carry into, or bring a carry out from, an intermediate stage.

Figure 2 shows how to make a 3-bit adder. Tying the oper-

and inputs of the fourth adder (A₃, B₃) LOW makes S₃de-

pendent only on, and equal to, the carry from the third adder.

Using somewhat the same principle, Figure 3 shows a way

of dividing the ’ACT283 into a 2-bit and a 1-bit adder. The

third stage adder (A₂, B₂, S₂) is used merely as a means of

getting a carry (C₁₀) signal into the fourth stage (via A₂and

B₂) and bringing out the carry from the second stage on S₂.

DS100977-2

DS100977

www.national.com

12 3 4 5 6 7 8

中文翻译

下载PDF

与54ACT283相关器件

型号	品牌	获取价格	描述	数据表
54ACT283D	NSC	获取价格	4-Bit Binary Full Adder with Fast Carry
54ACT283DM	TI	获取价格	ACT SERIES, 4-BIT ADDER/SUBTRACTOR, CDIP16, CERAMIC, DIP-16
54ACT283DMQB	ETC	获取价格	Binary Adder
54ACT283DMQB/NOPB	TI	获取价格	ACT SERIES, 4-BIT ADDER/SUBTRACTOR, CDIP16, CERAMIC, DIP-16
54ACT283F	NSC	获取价格	4-Bit Binary Full Adder with Fast Carry
54ACT283FM	TI	获取价格	ACT SERIES, 4-BIT ADDER/SUBTRACTOR, CDFP16, CERAMIC, FP-16
54ACT283FMQB	ETC	获取价格	Binary Adder
54ACT283L	NSC	获取价格	4-Bit Binary Full Adder with Fast Carry
54ACT283LM	TI	获取价格	ACT SERIES, 4-BIT ADDER/SUBTRACTOR, CQCC20, CERAMIC, LCC-20
54ACT283LMQB	ETC	获取价格	Binary Adder

与54ACT283相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

6
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

3
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

29
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

12

产品中心

服务支持

精选活动

关于我们

帮助中心

54ACT283

54ACT283 数据手册

与54ACT283相关器件

与54ACT283相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

54ACT283

54ACT283 数据手册

与54ACT283相关器件

与54ACT283相关文章

您还可以找

您在本页遇到什么问题？