Product Specification
PE4220
SPDT UltraCMOS™ RF Switch
DC - 2500 MHz
Product Description
Features
The PE4220 UltraCMOS™ RF Switch is designed to cover a
broad range of applications from near DC to 2500 MHz. This
single-supply switch integrates on-board CMOS control logic
driven by a simple, single-pin CMOS or TTL compatible control
input. Using a nominal +3-volt power supply, a typical input 1
dB compression point of +22 dBm can be achieved. The
PE4220 also exhibits input-output isolation of better than 37 dB
at 1000 MHz and is offered in a small 8-lead MSOP package.
• Single 3-volt power supply
• Very low insertion loss: 0.25 dB at
1000 MHz
• High isolation: 37 dB at 1.0 GHz
• Typical input 1 dB compression point
of +22.5 dBm
• Single-pin CMOS or TTL logic control
• Packaged in a small 8-lead MSOP
The PE4220 UltraCMOS™ RF Switch is manufactured in
Peregrine’s patented Ultra Thin Silicon (UTSi®) CMOS
process, offering the performance of GaAs with the economy
and integration of conventional CMOS.
Figure 1. Functional Diagram
Figure 2. Package Type
8-lead MSOP
RFC
RF1
RF2
CMOS
Control
Driver
CTRL
Table 1. Electrical Specifications @ +25 °C, VDD = 3 V (ZS = ZL = 50 ꢀ)
Parameter
Operating Frequency1
Insertion Loss
Conditions
Minimum
Typical
Maximum
2500
Units
MHz
dB
DC
1000 MHz
1000 MHz
1000 MHz
1000 MHz
0.25
37
0.35
Isolation – RFC to RF1/RF2
Isolation – RF1 to RF2
Return Loss
34.5
34
dB
35
dB
17.5
19
dB
‘ON’ Switching Time
‘OFF’ Switching Time
Video Feedthrough2
Input 1 dB Compression
Input IP3
CTRL to 0.1 dB final value, 2 GHz
CTRL to 25 dB isolation, 2 GHz
200
90
ns
ns
5.0
22.5
43.5
mVpp
dBm
dBm
2000 MHz
20
42
2000 MHz, 8 dBm
Notes:
1. Device linearity will begin to degrade below 10 MHz.
2. The DC transient at the output of any port of the switch when the control voltage is switched from Low to High or High to Low
in a 50Ω test set-up, measured with 1ns risetime pulses and 500 MHz bandwidth.
Document No. 70-0028-09 │ www.psemi.com
©2005 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 7