The Centi Line - .075" Contact Spacing
2D/CTA
Contacts
Contact Part Number
Part Number
Pin
Socket
Type
Pin
Socket
031-9540-000
031-9540-004
031-9540-005
030-9542-001 Standard 30µin. plating
030-9542-002 50µ in. plating
A resilient internal shoulder retains the contacts in the
insulator housing. The front of the contact is chamfered
to prevent damage to the internal shoulder as the
contact is pushed into position.
030-9542-004
With inspection hole;
50µ in. plating
N/A
030-9542-011 P.C. tail
.026 dia. x .083 lg. Soc.
030-9542-012 P.C. tail
*031-9540-013
.183 lg. Soc.
.020 dia. x
.183 lg. Pin
P.C. Tail Contacts
031-9540-016
030-9542-014 Long crimp
barrel **
Subtract .064 (1.63) +_ .010 (.25) from pigtail
length when used in 2D pin insulator for potting
well of connector assembly.
031-9540-022
030-9556-000 Small crimp bore
***
***
For AWG #32 & 30
Subtract .081 (2.08) +_ .010 (.25) from pigtail
length when used in 2D socket insulator for
potting well of connector assembly.
031-9540-007
*031-9540-015
030-9542-022 Small crimp bore
For AWG #28 & 30
030-9542-015 P.C. tail
.232 lg. Soc.
.020 dia. x
.255 lg. Pin
*031-9540-019
030-9542-016 P.C. tail
.444 lg. Soc.
.018 dia. x
.445 lg. Pin
50µ in. plating
NOTE: Plating, except as noted, is 30 micro-inch gold.
* Consult factory for any tail size or plating requirements.
** Special crimp locator required. Part number: 995-0001-714. (L3198-CL-PSL)
*** Use special insertion tip (323-9510-016 &-017).
2D and Centi-Loc Crimp and Assembly Tools
Tool
Locators
Pin
Socket
Description
Part Number
M22520/2-01
995-0001-584
L3198-CLP
L3198-CLS
995-0001-338
995-0001-353
M22520/2-01
Insertion Tools For Standard Contact
AWG
Size*
Kit Part Number
(handle and tip)
Tip
Handle
Part Number**
Part Number**
22
CIT-PS-CTA-22
CIT-PS-CTA-24
CIT-PS-CTA-26
CIT-PS-CTA-28
CIT-PS-CTA-30
323-9510-001
323-9510-002
323-9510-003
323-9510-004
323-9510-005
204-9500-000
204-9500-000
204-9500-000
204-9500-000
204-9500-000
24
26
CIET-CTA
Handle
Insertion Tips
28
30/P.C. Tail
* Based on wire size per MIL-W-16878 with Type E insulation, use smaller tool for wire with thin
insulation, larger tool for wire having thick insulation.
** The 5 insertion tips (part numbers 323-9510-001 thru - 005). plus handle, and the pin and socket
extaction tips maybe ordered as a SINGLE KIT by specifying the part number CIET-CTA-2.
[Part number: 070143-0002].
Insertion Tools For Long Crimp barrel Contacts
AWG
Size*
Tip Part Number ***
Pin Contact
Tip Part Number ***
Socket Contact
Handle
Part Number***
22
24
26
323-9510-008
323-9510-009
323-9510-010
323-9510-012
323-9510-013
323-9510-014
204-9500-000
204-9500-000
204-9500-000
CTA-AB
Assembly Holding
Block
*** To order the SINGLE KIT for the long crimp barrel contact (tip part numbers 323-9510-008 thru
-014, handle and pin and socket extraction tips) please specify CIET-CTA-3.
Part Number: 328-9508-000
Extraction Tools
Kit Part Number
(handle and tip)
Tip Part
Number
Handle Part
Number
Contact
CENTIPIN
Description
CET-P-CTA-2
CET-S-CTA-1
Socket Extraction
Pin Extraction
Tip
070112-0002
070113-0001
324-9502-000
324-9501-000
204-9500-000
204-9500-000
Tip
CENTISOCKET
Dimensions shown in inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
67