Document 720-1
1515SQ
2222SQ
2929SQ
Square Air Core Inductors
• Excellent Q factors – up to 230 at 400 MHz!
• Current handling as high as 5.7 Amps
• Inductance values from 47 to 500 nH
• Flat top and bottom for reliable pick and place and mechanical
stability
Designer’s Kit C438 contains 10 each of all 5% parts
Terminations RoHS compliant tin-silver over copper
Ambient temperature –40°C to +125°C with Irms current, +125°C
to +145°C with derated current
Storage temperature Component: –40°C to +145°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Mean Time Between Failures (MTBF) 1 billion hours
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
Test
frequency
(MHz)
Inductance2
(nH)
Percent
Q4
typ
SRF min5
(GHz)
DCR max
(mOhm)
Irms6
(A)
Part number1
tolerance3
1515SQ-47N_E_
1515SQ-68N_E_
1515SQ-82N_E_
47
68
82
5,2
5,2
5,2
230
230
230
400
400
400
1.87
2.13
1.79
6.35
8.60
9.40
4.9
5.5
5.6
2222SQ-90N_E_
2222SQ-111_E_
2222SQ-131_E_
2222SQ-161_E_
2222SQ-181_E_
2222SQ-221_E_
2222SQ-271_E_
2222SQ-301_E_
90
110
130
160
180
220
270
300
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
140
140
140
140
140
140
140
150
50
50
50
50
50
50
50
50
1.15
1.00
1.00
1.00
1.10
1.00
0.800
0.720
5.50
6.50
7.50
8.25
9.50
11.0
12.5
13.8
5.0
5.7
5.4
5.7
5.0
5.0
4.3
3.7
2929SQ-331_E_
2929SQ-361_E_
2929SQ-391_E_
2929SQ-431_E_
2929SQ-501_E_
330
360
390
430
500
5,2
5,2
5,2
5,2
5,2
180
180
180
180
180
50
50
50
50
50
0.660
0.620
0.590
0.550
0.500
12.5
13.5
14.5
15.5
16.5
4.7
4.5
4.4
4.2
4.3
1. When ordering, specify tolerance, termination and packaging codes:
1515SQ-82NJEC
2. Inductance measured at specified test frequency, 0.1 Vrms, 0 A using
an Agilent/HP 4287A LCR meter with the following Coilcraft test fixtures:
CCF1191C for 1515SQ; CCF1197A for 2222SQ and 2929SQ.
Tolerance: G = 2% J = 5%
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured at specified test frequency, using an Agilent/HP 4291A
impedance analyzer.
5. SRF measured using an Agilent/HP 8753 network analyzer and the
following Coilcraft test fixtures: CCF1143 for 1515SQ; CCF1199
for 2222SQ-90N and 2222SQ-161; CCF1200 for 2222SQ-301 and
2929SQ-501.
6. Current that causes a 20°C temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
(Table shows stock tolerances in bold.)
Termination: E = RoHS compliant tin-silver (96.5/3.5) over copper.
Special order, added cost:
T = RoHS tin-silver-copper (95.5/4/0.5) over copper
or S = non-RoHS tin-lead (63/37) over copper.
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape.
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked.
Document 720-1 Revised 08/16/12
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.