Datasheet > 2210-005

2210-005

更新时间： 2022-12-14 18:28:04

品牌	Logo	应用领域
其他 - ETC		/
页数	文件大小	规格书
3页	539K
描述
ANALOG ACCELEROMETER MODULE

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

2210-005 数据手册

SILICON DESIGNS, INC

Model 2210

ANALOG ACCELEROMETER MODULE

! Capacitive Micromachined

! Nitrogen Damped

! 4V Differential Output or

0.5V to 4.5V Single Ended Output

! Fully Calibrated

! Low Power Consumption

! -40 to +85EC Operation

! +9 to +32V DC Power

! Simple Four Wire Connection

ACTUAL SIZE

! Low Impedance Outputs Will Drive

Up To 15 Meters of Cable

! Responds to DC and AC Acceleration

ORDERING INFORMATION

Full Scale

Model

! Non Standard g Ranges Available

! Rugged Anodized Aluminum Module

! Low Cost

Acceleration

Number

2 g

5 g

2210-002

2210-005

2210-010

2210-025

2210-050

2210-100

2210-200

2210-400

± 10 g

± 25 g

± 50 g

±100 g

±200 g

±400 g

! Serialized for Traceability

DESCRIPTION

The Model 2210 accelerometer module combines an integrated model 1210L accelerometer with high drive, low

impedance buffering for measuring acceleration in commercial/industrial environments. It is tailored for zero to

medium frequencyinstrumentation applications. Theanodized aluminum case is epoxysealed and is easilymounted

via two #4 (or M3) screws. On-board regulation is provided to minimize the effects of supply voltage variation. It is

relatively insensitive to temperature changes and thermal gradients. The cable’s shield is electrically connected to

the case while the ground (GND) wire is isolated from the case. An optional initial calibration sheet (2210-CAL) and

periodic calibration checking are also available.

OPERATION

The Model 2210 accelerometer module produces two analog voltage outputs which vary with acceleration as shown

in the graph on the next page. The sensitive axis is perpendicular to the bottom of the package, with positive

acceleration defined as a force pushing on the bottom of the package. The signal outputs are fully differential about

a common mode voltage of approximately 2.5 volts. The output scale factor is independent from the supply voltage

of +9 to +32 volts. At zero acceleration the output differential voltage is nominally 0 volts DC; at full scale

acceleration the output differential voltage is 4 volts DC respectively.

APPLICATIONS

! VIBRATION MONITORING

! VIBRATION ANALYSIS

! MACHINE CONTROL

! MODAL ANALYSIS

! ROBOTICS

! CRASH TESTING

! INSTRUMENTATION

Silicon Designs, Inc. ! 1445-NW Mall Street, Issaquah, WA 98027-5344 ! Phone: 425-391-8329 ! Fax: 425-391-0446

web site: www.silicondesigns.com [page 1] May 07

12 3

中文翻译

下载PDF

与2210-005相关器件

型号	品牌	获取价格	描述	数据表
2--21000--6	MACOM	获取价格	0.8mm CHAMP* Crimper Assemblies
2--21000--7	MACOM	获取价格	0.8mm CHAMP* Crimper Assemblies
2-21000-7	TE	获取价格	THE REPLACEMENT OCEAN STYLE APPLICATOR HAS THE SAME TERMINATOR/PRESS INTERFACE AS APPLICAT
2-21000-9	TE	获取价格	THE REPLACEMENT OCEAN STYLE APPLICATOR HAS THE SAME TERMINATOR/PRESS INTERFACE AS APPLICAT
221001	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses - Designed to IEC Standard
221001.	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses - Designed to IEC Standard
221001.M	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses - Designed to IEC Standard
2210-010	ETC	获取价格	ANALOG ACCELEROMETER MODULE
22-100-100	ETC	获取价格	Analog IC
22100101	QUALTEK	获取价格	POWER CORD

与2210-005相关文章

深入解读IR2103资料手册：引脚说明、电气参数及替换型号推荐
2024-06-06

2
L7805CV手册解读：引脚说明、替代型号推荐、好坏检测
2024-06-06

2
MMBT5551资料手册解读：电气参数、替换型号推荐
2024-06-06

2
APW7073资料手册解读：产品特性、引脚说明、替换型号推荐
2024-06-06

1

产品中心

服务支持

精选活动

关于我们

帮助中心

2210-005

2210-005 数据手册

与2210-005相关器件

与2210-005相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

2210-005

2210-005 数据手册

与2210-005相关器件

与2210-005相关文章

您还可以找

您在本页遇到什么问题？