Datasheet > 2-21006-9

2-21006-9

更新时间： 2024-02-07 13:18:50

品牌	Logo	应用领域
泰科 - TE		/
页数	文件大小	规格书
4页	186K
描述
Read these instructions and understand them before using the seating tool.

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

2-21006-9 数据手册

Instruction Sheet

Seating Tools 91348-[ ], 91349-[ ], and

91375-[ ] for Hard Metric (HM)-Zd

Header Connectors

408-8501

09 FEB 16 Rev J

Adapter

Blade with Key(s)

HM-Zd Header Connector

(Ref)

Printed Circuit (PC) Board

Eye-of-Needle Contacts

SEATING

TOOL

91348-[ ]

91375-[ ]

91349-[ ]

CONNECTOR

TYPE

PC Board Support Fixture

(Custom Designed)

2-pair

3-Pair

4-Pair

Figure 1

1. INTRODUCTION

Seating Tools 91348-[ ], 91349-[ ], and 91375-[ ] are used to seat HM-Zd header connectors onto a pc board.

See Figure 1. Dash number indicates number of connector columns. The connectors contain eye-of-needle

contacts which allow solderless pc board installation.

NOTE

All numerical values in this instruction sheet are in metric units [with U.S. customary units in brackets]. Dimensions are in

millimeters [and inches]. Figures are not drawn to scale.

Read these instructions and understand them before using the seating tool.

Reasons for reissue of this instruction sheet are provided in Section 7, REVISION SUMMARY.

2. DESCRIPTION

The seating tool consists of an adapter and a blade. The blade contains a key(s) that properly orients the tool

to the connector.

During seating, the adapter provides a surface to accept the force applied by the application tool, and the blade

sits inside the connector engaging the housing floor and contact shoulders preventing the contacts from

pushing out of the housing.

3. REQUIREMENTS

3.1. PC Board Support Fixture (Custom Designed)

A pc board support must be used to provide proper support for the pc board and alignment of the tool to the

contacts and to protect the pc board and contacts from damage.

This controlled document is subject to change.

For latest revision and Regional Customer Service,

visit our website at www.te.com.

*Trademark

TOOLING ASSISTANCE CENTER 1-800-722-1111

PRODUCT INFORMATION 1-800-522-6752

1 of 4

TE Connectivity, TE connectivity (logo), and TE (logo) are trademarks. Other logos, product, and/or company names may be trademarks of their respective owners.

12 3 4

中文翻译

下载PDF

与2-21006-9相关器件

型号	品牌	获取价格	描述	数据表
221008	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses - Designed to IEC Standard
221008.	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses - Designed to IEC Standard
221008.M	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses - Designed to IEC Standard
2--21008--1	TE	获取价格	Cumulative Trauma Disorders can result from the prolonged use ofmanually powered hand tool
221008M	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses - Designed to IEC Standard
22-100DV	ETC	获取价格	Analog IC
22-101	OENINDIA	获取价格	MICRO SWITCH
22101.6	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses - Designed to IEC Standard
22101.6M	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses - Designed to IEC Standard
221010	LITTELFUSE	获取价格	Axial Lead and Cartridge Fuses - Designed to IEC Standard