1S7B_4UP Series
1W - Single/Dual Output DC-DC Converter - Fixed Input - Isolated & Unregulated
DC-DC Converter
1 Watt
The 1S7B_4UP series is specially designed for applications where an isolated voltage
High efficiency up to 83%
4000VDC isolation
Ambient temperature:
-40°C to +105°C
is required in a distributed power supply system.
SIP package
RoHS compliance
These products apply to:
International standard pinout
Short circuit protection (SCP)
1) Where the voltage of the input power supply is stable
(voltage variation ≤ 10%)
2) Where isolation is necessary between input and output
(isolation voltage ≤4000VDC)
3) Where the regulation of the output voltage and the output ripple noise are not
demanding
Such as: pure digital circuits, low frequency analog circuits and relay-driven cir-
cuits, etc.
Common specifications
Short circuit protection:
Case temperature above ambient:
Cooling:
Output specifications
Continuous
Item
Test condition
Min Typ
Max
1.2
Units
%
30°C MAX
Output voltage
accuracy
See tolerance envelope curve
Free air convection
-40°C – +105°C
-50°C – +130°C
300°C MAX, 1.5mm from case for 10 sec
< 95%
Line regulation
For Vin change of 1%
1
Operation temperature range:
Storage temperature range:
Lead temperature:
Switching frequency • 3.3V input
• 5VDC input
95
kHz
kHz
kHz
kHz
kHz
120
120
145
90
140
140
180
180
• 9VDC input
• 12VDC input
Storage humidity range:
MTBF (MIL-HDBK-217F@25°C):
Case material:
• 15VDC input
>3,500,000 hours
Plastic [UL94-V0]
2.1g
Input specifications
Weight:
Item
Test condition
Min
Typ
Max
Units
Voltage range
• 3.3V input
2.9
4.4
8.03
11
3.3
5
3.6
5.6
10
13.3
16.4
VDC
VDC
VDC
VDC
VDC
• 5VDC input
• 9VDC input
• 12VDC input
• 15VDC input
Isolation specifications
9
12
15
Item
Test condition
Min
Typ
Max
Units
VDC
GΩ
13.4
Isolation voltage
Isolation resistance
Tested for 1 minute
Test at 1000VDC
4000
1000
Voltage Vin:
maximum rating
• 3.3V input
5.5
6.6
11.5
14.5
18
VDC
VDC
VDC
VDC
VDC
• 5VDC input
• 9VDC input
• 12VDC input
• 15VDC input
Example:
Internal power
dissipation
maximum rating
540
mW
1S7B_0505D4UP
1= 1Watt; S7= SIP7; B= Pinning; 5Vin; 5Vout; D= Dual Output;
4= 4kVDC; U= Unregulated Output; P= Short circuit protection
Note:
1. Operation under minimum load will not damage the converter; however, they
may not meet all specifications.
2. Unless otherwise noted, All specifications are measured at Ta=25°C,
humidity<75%, nominal input voltage and rated output load.
3. In this datasheet, all test methods are based on our corporate standards.
4. All characteristics are for listed models, and non-standard models may perform
differently. Please contact our technical support for more detail.
5. Please contact our technical support for any specific requirement.
6. Specifications of this product are subject to changes without prior notice.
Page 1 of 3
1S7B_4UP – Rev. 2018-1.0
Specifications subject to change without notice.
GAPTEC-Electronic GmbH & Co. KG
sales@gaptec-electronic.com – www.gaptec-electronic.com