1N5186US thru 1N5190US
VOIDLESS-HERMETICALLY SEALED
SURFACE MOUNT FAST RECOVERY
S C O T T S D A L E D I V I S I O N
DESCRIPTION
APPEARANCE
This “fast recovery” rectifier diode series is ideal for high-reliability applications
where a failure cannot be tolerated. These industry-recognized 3.0 Amp rated
rectifiers for working peak reverse voltages from 100 to 600 volts are hermetically
sealed with voidless-glass construction using an internal “Category I” metallurgical
bond. These devices are also available in military qualified axial-leaded packages
by deleting the “US” suffix. Microsemi also offers numerous other rectifier products
to meet higher and lower current ratings with various recovery time speed
requirements including fast and ultrafast device types in both through-hole and
surface mount packages.
Package “E”
or D-5B
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
•
Surface mount equivalent to the popular JEDEC
•
Fast recovery 3 Amp rectifiers 100 to 600 V
registered 1N5186 to 1N5190 series
•
•
Military and other high-reliability applications
General rectifier applications including bridges,
half-bridges, catch diodes, etc.
•
•
•
•
•
Voidless hermetically sealed glass package
Triple-Layer Passivation
Internal “Category I” Metallurgical bonds
Working Peak Reverse Voltage 100 to 600 Volts.
Further options in screening in accordance with MIL-
PRF-19500/424 for JAN, JANTX, and JANTXV by adding
a MQ, MX, or MV prefix respectively, e.g. MX1N5186US,
MV1N5187US, etc.
•
•
•
High forward surge current capability
Extremely robust construction
Low thermal resistance
•
Controlled avalanche with peak reverse power
capability
•
Inherently radiation hard as described in
Microsemi MicroNote 050
•
Axial-leaded package equivalents also available (see
separate data sheet for 1N5186 thru 1N5190)
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
•
•
•
•
Junction & Storage Temperature: -65oC to +175oC
Thermal Resistance: 10oC/W junction to end cap
Thermal Impedance: 1.5oC/W @ 10 ms heating time
Average Rectified Forward Current (IO): 3.0 Amps @ TA =
25ºC and 0.700 Amps at TA = 150ºC
•
•
CASE: Hermetically sealed voidless hard glass
with Tungsten slugs
TERMINATIONS: End caps are solid silver with
Tin/Lead (Sn/Pb) finish
MARKING: Cathode band only
POLARITY: Cathode indicated by band
TAPE & REEL option: Standard per EIA-481-B
WEIGHT: 539 mg
•
•
•
•
•
•
•
Forward Surge Current: 80 Amps @ 8.3 ms half-sine
Solder Temperatures: 260ºC for 10 s (maximum)
See package dimensions on last page
ELECTRICAL CHARACTERISTICS
WORKING
MINIMUM
BREAKDOWN
VOLTAGE
FORWARD
VOLTAGE
MAXIMUM
REVERSE
CURRENT
MAXIMUM
REVERSE
RECOVERY
TIME
AVERAGE
RECTIFIED
PEAK
REVERSE
VOLTAGE
CURRENT AMPS
V
F
V
V
@ 50µA
I
@ V
t
I
@ 9A (pulsed)
TYPE
RWM
BR
R
RWM
rr
O
MIN
MAX
25oC
µA
100oC
25oC
AMPS
3.0
150oC
AMPS
0.7
VOLTS
100V
200V
400V
500V
600V
VOLTS
VOLTS
VOLTS
ns
150
200
250
300
400
µA
1N5186US
1N5187US
1N5188US
1N5189US
1N5190US
120V
240V
480V
550V
660V
3.0
0.7
0.9V
1.5V
2.0
100
3.0
0.7
3.0
0.7
3.0
0.7
Copyright 2004
Microsemi
Page 1
12-10-2004 REV A
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503