Datasheet for part number 121143-6400W
Our Catalog Part Number: CA06EW24-11PWB-15
Our Global Manufacturing Part Number: 121143-6400 W
Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET
Product Datasheet
Bayonet
Connector with bayonet coupling
Plug, straight
Shell Style
Shielded connector with spring washer,
endbell for shielded braids and heat shrinkable boots
Endbell Style
Gender
Pin
Shell Size
24
Contact Arrangement
Number of contacts
Contact Type
Contact Plating
Shielding
24-11
3 contacts size 8, 6 contacts size 12
AWG Crimp
Hard silver
yes
Insulator Rotation
35°
Contact Rating at +20 °C (68 °F)
(Size 25/12)
41 A
74 A
Contact Rating at +20 °C (68 °F)
(Size 60/100/8)
Contact Resistance (Size 25/12)
Contact Resistance (Size 60/100/8)
Wire Cross Section
3 mΩ
1 mΩ
AWG 8 (Size 8 ), AWG 14/12 (Size 12)
In case of voltages greater than 50V the connector
must be used in accordance with DIN VDE part 410,
IEC 60364-4-41.
Operating Voltage
Acc. To VG95319, part 2, test no. 5.12
and VG95210, part 32, test conditions B,
standard insulator material > 1000 MΩ
Insulator Resistance
Test Voltage
2000 Vrms
1,1 mm
Air and Creepage Paths (Min)
Standard insulator material -55°/+125°C
(-67/257°F)
Ambient Temperature
Safety Provisions
IP67 and IP68 (1 bar pressure after 12 hrs) acc. to
DIN 40 050
Salt Spray Resistance
500 hours salt spray resistant
Mating Cycles
500 min
1,5 N
Sep. Force per Contact (Size 25/12)
Sep. Force per Contact (Size 60/100/8)
3,0 N
For infos on Gage please see catalog
VG95234, part 1
Gage
Coupling Torque
Closing: 14 Nm max / Opening: 0,8 Nm min
Contact Retention (Size 25/12)
Contact Retention (Size 60/100/8)
Shell Material
55 N
80 N
Aluminium alloy
Olive drab chromate over cadmium plating
(conductive)
Shell Plating
Insulator and Grommet Material
Contact Material
CR-Elastomere
Copper alloy
Harnessing Info: Contact Cross-Section
See assembly instruction
Specifications and dimensions subject to change.
Page 1 of 2