Datasheet for part number 121146-3079X
Our Catalog Part Number: VG95234M365PX
Our Global Manufacturing Part Number: 121146-3079 X
Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET
Product Datasheet
Bayonet
Connector with bayonet coupling
Plug, straight
Shell Style
Shielded connector with spring washer,
endbell for shielded braids and heat shrinkable boots
Endbell Style
Gender
Pin
Shell Size
36
Contact Arrangement
Number of contacts
Contact Type
Contact Plating
Shielding
36-5
4 contacts size 500
Metric Crimp
Hard silver
yes
Insulator Rotation
120°
Contact Rating at +20 °C (68 °F)
(Size 500/0)
245 A
Contact Resistance (Size 500/0)
Wire Cross Section
0,2 mΩ
50mm²
In case of voltages greater than 50V the connector
must be used in accordance with DIN VDE part 410,
IEC 60364-4-41.
Operating Voltage
Acc. To VG95319, part 2, test no. 5.12
and VG95210, part 32, test conditions B,
standard insulator material > 1000 MΩ
Insulator Resistance
Test Voltage
2000 Vrms
1,1 mm
Air and Creepage Paths (Min)
Standard insulator material -55°/+125°C
(-67/257°F)
Ambient Temperature
Safety Provisions
IP67 and IP68 (1 bar pressure after 12 hrs) acc. to
DIN 40 050
Salt Spray Resistance
Mating Cycles
500 hours salt spray resistant
500 min
8,5 N
Sep. Force per Contact (Size 500/0)
For infos on Gage please see catalog
VG95234, part 1
Gage
Coupling Torque
Closing: 23 Nm max / Opening: 1,03 Nm min
Contact Retention (Size 500/0)
Shell Material
95 N
Aluminium alloy
Olive drab chromate over cadmium plating
(conductive)
Shell Plating
Insulator and Grommet Material
Contact Material
CR-Elastomere
Copper alloy
Harnessing Info: Contact Cross-Section
See assembly instruction
Harnessing Info: Insulator Diameter
Wire Stripping (Size 500/0)
General Info
See assembly instruction
13,7 mm
All tests in accordance with VG95319 and/or if
applicable with VG95210
Specifications and dimensions subject to change.
Page 1 of 1