Datasheet for part number 121144-0309W
Our Catalog Part Number: CA3106E28-22PWB-14
Our Global Manufacturing Part Number: 121144-0309 W
Brand: Cannon Product Category: Circular Product Line: CA Bayonet Series: CA BAYONET
Product Datasheet
Bayonet
Connector with bayonet coupling
Plug, straight
Shell Style
Shielded connector with endbell for shielded braids
and heat shrinkable boots
Endbell Style
Gender
Pin
Shell Size
28
Contact Arrangement
Number of contacts
Contact Type
Contact Plating
Shielding
28-22
3 contacts size 160, 3 contacts size 15
Metric Crimp
Hard silver
yes
Insulator Rotation
70°
Contact Rating at +20 °C (68 °F)
(Size 15/15S/16/16S)
22 A
Contact Rating at +20 °C (68 °F)
(Size 160/4)
135 A
6 mΩ
Contact Resistance
(Size 15/15S/16/16S)
Contact Resistance (Size 160/4)
Wire Cross Section
0,5 mΩ
16 mm² (Size 160), 0,75-1,5 mm² (Size 15)
In case of voltages greater than 50V the connector
must be used in accordance with DIN VDE part 410,
IEC 60364-4-41.
Operating Voltage
Acc. To VG95319, part 2, test no. 5.12
and VG95210, part 32, test conditions B,
standard insulator material > 1000 MΩ
Insulator Resistance
Test Voltage
2500 Vrms
2,8 mm
Air and Creepage Paths (Min)
Standard insulator material -55°/+125°C
(-67/257°F)
Ambient Temperature
Safety Provisions
IP67 and IP68 (1 bar pressure after 12 hrs) acc. to
DIN 40 050
Salt Spray Resistance
Mating Cycles
500 hours salt spray resistant
500 min
Sep. Force per Contact
(Size 15/15S/16/16S)
1,0 N
4,0 N
Sep. Force per Contact (Size 160/4)
For infos on Gage please see catalog
VG95234, part 1
Gage
Coupling Torque
Closing: 17 Nm max / Opening: 0,92 Nm min
Contact Retention
(Size 15/15S/16/16S)
35 N
Contact Retention (Size 160/4)
Shell Material
90 N
Aluminium alloy
Olive drab chromate over cadmium plating
(conductive)
Shell Plating
Insulator and Grommet Material
CR-Elastomere
Copper alloy
Contact Material
Specifications and dimensions subject to change.
Page 1 of 2