5秒后页面跳转
10CA-5G6/C02 PDF预览

10CA-5G6/C02

更新时间: 2024-09-19 02:33:03
品牌 Logo 应用领域
爱模 - MSYSTEM /
页数 文件大小 规格书
3页 93K
描述
High-density Signal Conditioners 10-RACK

10CA-5G6/C02 数据手册

 浏览型号10CA-5G6/C02的Datasheet PDF文件第2页浏览型号10CA-5G6/C02的Datasheet PDF文件第3页 
MODEL: 10CA  
F: 0 – 10 mA DC (Load resistance 1200 Ω max.)  
High-density Signal Conditioners 10-RACK  
G: 0 – 1 mA DC (Load resistance 12 kΩ max.)  
Voltage  
CT TRANSMITTER  
(Average sensing, RMS calibrated)  
1: 0 – 10 mV DC (Load resistance 10 kΩ min.)  
2: 0 – 100 mV DC (Load resistance 100 kΩ min.)  
3: 0 – 1 V DC (Load resistance 100 Ω min.)  
4: 0 – 10 V DC (Load resistance 1000 Ω min.)  
5: 0 – 5 V DC (Load resistance 500 Ω min.)  
6: 1 – 5 V DC (Load resistance 500 Ω min.)  
Functions & Features  
• Converting an alternating current from a current  
transformer into two standard process signals  
• Minimum ripple  
• Optional second channel output available at the front  
terminals and at the Standard Rack connector  
[3] OUTPUT 2  
0: None  
Typical Applications  
Voltage  
• Centralized monitoring and control of motors, pumps or  
heaters by DCS  
6: 1 – 5 V DC (Load resistance 5000 Ω min.)  
• Monitoring power line and power supply current  
POWER INPUT  
DC Power  
R: 24 V DC  
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)  
[4] OPTIONS  
blank: none  
/Q: With options (specify the specification)  
SPECIFICATIONS OF OPTION: Q  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
/C02: Polyurethane coating  
MODEL: 10CA–[1][2][3]–R[4]  
/C03: Rubber coating  
ORDERING INFORMATION  
• Code number: 10CA-[1][2][3]-R[4]  
Specify a code from below for each [1] through [4].  
(e.g. 10CA-1A6-R/Q)  
GENERAL SPECIFICATIONS  
Construction: Rack-mounted; terminal access via screw  
terminals at the front and via card-edge connector at the  
rear; terminal cover provided  
• Specify the specification for option code /Q  
(e.g. /C01)  
Connection  
Input: M3.5 screw terminals (torque 0.8 N·m)  
Output: Card-edge connector and M3.5 screw terminals  
(torque 0.8 N·m)  
[1] INPUT (sine wave)  
Current  
Power input: Supplied from card-edge connector  
Screw terminal: Nickel-plated steel  
1: 0 – 1 A AC  
Housing material: Flame-resistant resin (black)  
Isolation: Input to output 1 to output 2 to power  
Input waveform: Sine wave  
5: 0 – 5 A AC  
[2] OUTPUT 1  
Current  
Overrange output: 0 to 120 % at 1 – 5 V  
Zero adjustment: -5 to +5 % (front)  
A: 4 – 20 mA DC (Load resistance 600 Ω max.)  
B: 2 – 10 mA DC (Load resistance 1200 Ω max.)  
C: 1 – 5 mA DC (Load resistance 2400 Ω max.)  
D: 0 – 20 mA DC (Load resistance 600 Ω max.)  
E: 0 – 16 mA DC (Load resistance 750 Ω max.)  
Span adjustment: 95 to 105 % (front)  
INPUT SPECIFICATIONS  
Frequency: 50 or 60 Hz  
Input burden: 0.5 VA max.  
http://www.m-system.co.jp/  
10CA SPECIFICATIONS  
ES-0837 Rev.6 Page 1/3  

与10CA-5G6/C02相关器件

型号 品牌 获取价格 描述 数据表
10CA-5G6/C03 MSYSTEM

获取价格

High-density Signal Conditioners 10-RACK
10CAE1000S SURGE

获取价格

Aluminum Electrolytic Capacitor, Polarized, Aluminum, 10V, 20% +Tol, 20% -Tol, 1000uF, 434
10CAE2200S SURGE

获取价格

Aluminum Electrolytic Capacitor, Polarized, Aluminum, 10V, 20% +Tol, 20% -Tol, 2200uF, 535
10CAE220S SURGE

获取价格

Aluminum Electrolytic Capacitor, Polarized, Aluminum, 10V, 20% +Tol, 20% -Tol, 220uF, 2926
10CAE33S SURGE

获取价格

Aluminum Electrolytic Capacitor, Polarized, Aluminum, 10V, 20% +Tol, 20% -Tol, 33uF, 2421,
10CAE470S SURGE

获取价格

Aluminum Electrolytic Capacitor, Polarized, Aluminum, 10V, 20% +Tol, 20% -Tol, 470uF, 3533
10CAE47S SURGE

获取价格

Aluminum Electrolytic Capacitor, Polarized, Aluminum, 10V, 20% +Tol, 20% -Tol, 47uF, 2926,
10CB15K8E OHMITE

获取价格

Fixed Resistor, Wire Wound, 10W, 15800ohm, 1600V, 0.1% +/-Tol, -30,30ppm/Cel,
10CB162RE OHMITE

获取价格

Fixed Resistor, Wire Wound, 10W, 162ohm, 1600V, 0.1% +/-Tol, -30,30ppm/Cel,
10CB1K23E OHMITE

获取价格

Fixed Resistor, Wire Wound, 10W, 1230ohm, 1600V, 0.1% +/-Tol, -30,30ppm/Cel,