Document 773-1
Ferrite Chip Inductors
–
0603AF
• Higher inductance values than ceramic 0603 inductors
• Heavier gauge wire for low DCR
• Ferrite construction for high current handling
• Inductance values from 15 nH to 10 µH
Impedance typ (Ohms)
Inductance2
±±5 (nH)
SRF typ4
(MHz)
DCR max5
(Ohms)
Irms6
(A)
Color
code7
Part number1
Qtyp3
100 MHz
±00 MHz
0603AF-15NXJE_
0603AF-33NXJE_
0603AF-47NXJE_
0603AF-72NXJE_
0603AF-111XJE_
15@7.9MHz
33@7.9MHz
47@7.9MHz
72@7.9MHz
110@7.9MHz
13@ 7.9MHz
13@7.9MHz
13@7.9MHz
15@7.9MHz
15@7.9MHz
10
19
42
60
70
42
90
210
385
350
3500
2300
2250
1800
1230
0.023
0.028
0.052
0.065
0.060
2.1
1.9
1.7
1.5
1.6
Yellow
Red
White
Blue
Red
0603AF-121XJE_
0603AF-241XJE_
0603AF-271XJE_
0603AF-361XJE_
0603AF-421XJE_
120@7.9MHz
240@7.9MHz
270@7.9MHz
360@7.9MHz
420@7.9MHz
15@7.9MHz
15@7.9MHz
15@7.9MHz
15@7.9MHz
11@7.9MHz
76
140
173
210
250
410
810
1023
1310
1925
1150
900
750
700
685
0.089
0.12
0.22
0.21
0.33
1.4
Black
Violet
Brown
Blue
0.85
0.68
0.65
0.61
Red
0603AF-471XJE_
0603AF-561XJE_
0603AF-681XJE_
0603AF-821XJE_
0603AF-102XJE_
470@7.9MHz
560@7.9MHz
680@7.9MHz
820@7.9MHz
1000@7.9MHz
15@7.9MHz
16@7.9MHz
16@7.9MHz
16@7.9MHz
17@7.9MHz
306
371
420
507
663
2253
3180
3620
3300
9823
575
515
530
325
400
0.37
0.49
0.46
0.58
0.84
0.61
0.53
0.49
0.42
0.40
Orange
Blue
Orange
Green
Black
0603AF-152XJE_
0603AF-222XJE_
0603AF-472XJE_
1500@7.9MHz
2200@7.9MHz
4700@7.9MHz
17@7.9MHz
16@2.5MHz
16@7.9MHz
12@2.5MHz
944
5220
2100
1400
17,830
129
330
85
60
1.30
1.10
1.50
4.50
0.28
0.32
0.26
0.18
Orange
Red
Yellow
Gray
220
150
0603AF-103XJE_ 10000@2.5MHz
40
1. When ordering, please specify termination and packaging codes:
0603AF-102XJEW
Termination: E = Halogen free component. RoHS compliant silver-
palladium-platinum-glass frit terminations.
Special order:
Designer’s Kit C439 contains 10 each of all values
Core material Ferrite
Environmental RoHS compliant, halogen free
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost
R = RoHS compliant matte tin over nickel over
silver-platinum-glass frit
Q = RoHS tin-silver-copper (95.5/4/0.5) or
P = non-RoHS tin-lead (63/37).
Weight 4.3 – 5.7 mg
Ambient temperature –40°C to +85°C with Irms current
Maximum part temperature +100°C (ambient + temp rise) Derating.
Storage temperature Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
Packaging: W = 7″ machine-ready reel. EIA-481 punched paper tape
(2000 parts per full reel).
U = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter W instead.
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +50 to +300 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
2. Inductance measured at 0.1 Vrms, using Coilcraft SMD-A fixture
in Agilent/HP 4286A impedance analyzer with Coilcraft-provided
correlation pieces.
3. Q measured on Agilent/HP 4395A with Agilent/HP 16193 test fixture.
4. SRF measured using Agilent/HP 8753D network analyzer with
Coilcraft SMD-D test fixture.
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
One per billion hours / one billion hours, calculated per Telcordia SR-332
5. DCR measured on Cambridge Technology Micro-ohmmeter.
6. Current that causes a 15°C temperature rise from 25°C ambient.
Because of their open construction, these parts will not saturate. This
information is for reference only and does not represent absolute
maximum ratings. Click for temperature derating information.
7. Each part is marked with a single dot. The color dots are not unique
identifiers and correspond to multiple inductance values.
8. Electrical specifications at 25°C.
Packaging 2000 per 7″ reel; Paper tape: 8 mm wide, 1.0 mm thick,
4 mm pocket spacing
PCB washing Tested to MIL-STD-202 Method 215 plus an additional
aqueous wash. See Doc787_PCB_Washing.pdf.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Document 773-1 Revised 10/12/15
US +1-847-639-6400 sales@coilcraft.com
UK +44-1236-730595 sales@coilcraft-europe.com
Taiwan +886-2-2264 3646 sales@coilcraft.com.tw
China +86-21-6218 8074 sales@coilcraft.com.cn
Singapore + 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2016
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.