PIN RECEPTACLES
for 1,02 - 1,52 diameter pins (#03 contact)
and 1,5 - 1,6 diameter pins (#42 contact)
PINS
0433/8433
0435/0436
3,0055 DIA..
0,79
Basic Part
Number
Length
A
22,,6677 DDIIA..
1,993
C DDIIA.
K
4,06
Basic Part
Number
Dia.
C
Length
K
2,7777 DIA..
2,5599 DIA..
5,21
4,06
0433-0
8433-0
3,0ꢀ
8,38
6,86
043ꢀ-0
0436-0
3,0
3,18
1,27
1,78
6,48
7,37
2,,5544 DDIIA..
A
1,0022 DDIIA..
0435-0-15-XX-03-XX-10-0
Solder mount in 2,ꢀ9 min. mounting hole
Also available on 24mm wide carrier
tape: 9ꢀ0 parts per 330mm reel.
X433-0-15-XX-03-XX-04-0
Press-fit in 2,69 mounting hole
Order as: 043ꢀ-0-ꢀ7-XX-03-XX-10-0
4064
0342
2,,6699 DDIIAA..
1,2277
3,556 DIA.
3,9966 DDIIAA..
3,81
• 0342 receptacle uses
5,333
6,11
Mill-Max’s new #42 Contact.
This receptacle will accept
the Ø1,ꢀꢀ 0,0ꢀ power pins of
¼ brick DC/DC converters.
0,5511
4,1111
5,08
2,229
2,99
2,,1133 DDIIAA..
2,,3399 DDIIAA..
1,9988 DDIIAA..
0,2255
2,772
• #42 contact can be ordered
in standard receptacles that
use #03 contact; or it can be
specified as the spring
element inside custom made
receptacles.
P.C.B. Layout
4,5577
P.C.B.. PPADD
2,54
4064-0-18-XX-03-XX-40-0
Surface mount
0342-0-15-XX-42-XX-10-0
Hex press-fit in 2,29 0,0ꢀ
plated thru hole
Also available on 16mm wide carrier
tape: 2,400 parts per 330mm reel.
Order as: 4064-0-ꢀ8-XX-03-XX-40-0
4,57
0434
Mechanical Data #42 Contact:
Insertion/Extraction Force with a Ø1,ꢀꢀ (nominal) pin:
First Cycle
Insertion Force Extraction Force Insertion Force Extraction Force
20N 6N 10N 6N
2nd & Subsequent Cycles
3,,0055 DDIIA..
0,7799
1,,9933
2,,6677 DDIIA..
2,,7777 DDIIA..
4,066
5,211
6,866
Compliancy Test (the “spring back” characteristic of the contact to accept
Ø1,ꢀ small pin after insertion of a Ø1,6 large pin) :
2,,5599 DDIIA..
Initial Cycle with Ø1,ꢀ pin
Second Cycle with Ø1,6 pin
Third Cycle with Ø1,ꢀ pin
Ins. Force Ext. Force Ins. Force Ext. Force Ins. Force Ext. Force
18N 6N 22N 7N 3N 2N
(Insertion/Extraction Forces are in Newtons and measured with polished
steel gage pins having elliptical shaped tips).
0434-0-15-XX-03-XX-10-0
Press-fit in 2,69 mounting hole
ORDER CODE: XXXX - X - 1X - XX - XX - XX - XX - 0
BASIC PART #
SPECIFICATIONS
SHELL MATERIAL:
Brass Alloy 360, 1/2 Hard
SPECIFY SHELL FINISH:
SPECIFY CONTACT FINISH:
01 ꢀ,08μm TIN/LEAD OVER NICKEL
80 ꢀ,08μmTIN OVER NICKEL (RoHS)
15 0,2ꢀμm GOLD OVER NICKEL (RoHS)
01 ꢀ,08μm TIN/LEAD OVER NICKEL
80 ꢀ,08μm TIN OVER NICKEL (RoHS)
27 0,76μm GOLD OVER NICKEL (RoHS)
CONTACT MATERIAL:
Beryllium Copper Alloy 172, HT
DIMENSION IN INCHES
TOLERANCES ON:
LENGTHS:
DIAMETERS: 0,0ꢀ
ANGLES: 2ꢁ
0,13
SELECT CONTACT
#03 or #42 CONTACT (DATA ON PAGE 224)
RoHS
2002/95/EC
www.mill-max.com
516-922-6000
157