PIN RECEPTACLES
for .040” - .060” diameter pins (#03 contact)
and .059” - .063” diameter pins (#42 contact)
PINS
0433/8433
0435/0436
Basic Part
Number
Length
A
Basic Part
Number
043ꢀ-0
0436-0
Dia.
C
Length
K
0433-0
8433-0
.120
.330
.118
.12ꢀ
.0ꢀ0
.070
0435-0-15-XX-03-XX-10-0
Solder mount in .102 min. mounting hole
Also available on 24mm wide carrier
tape: 9ꢀ0 parts per 13” reel.
X433-0-15-XX-03-XX-04-0
Press-fit in .106 mounting hole
Order as: 043ꢀ-0-ꢀ7-XX-03-XX-10-0
4064
0342
.114400 DDIA.
.1066 DDIIAA..
.05500
.115566 DDIIAA..
• 0342 receptacle uses
.1500
Mill-Max’s new #42 Contact.
This receptacle will accept
the Ø.061 .002 power pins of
¼ brick DC/DC converters.
.21100
.24400
.002200
.116622
.220000
.00990
.111144
.08844 DDIIAA..
.09944 DDIIAA..
.007788 DDIIAA..
.001100
.1107
• #42 contact can be ordered
in standard receptacles that
use #03 contact; or it can be
specified as the spring
element inside custom made
receptacles.
P.C.B. Layout
.118800
P.C.B.. PPADD
.100
4064-0-18-XX-03-XX-40-0
Surface mount
0342-0-15-XX-42-XX-10-0
Hex press-fit in .090 .002
plated thru hole
Also available on 16mm wide carrier
tape: 2,400 parts per 13” reel.
Order as: 4064-0-ꢀ8-XX-03-XX-40-0
.180
0434
Mechanical Data #42 Contact:
Insertion/Extraction Force with a Ø.061 (nominal) pin:
First Cycle
Insertion Force Extraction Force Insertion Force Extraction Force
20N 6N 10N 6N
2nd & Subsequent Cycles
Compliancy Test (the “spring back” characteristic of the contact to accept
Ø.0ꢀ9 small pin after insertion of a Ø.063 large pin) :
Initial Cycle with Ø.0ꢀ9 pin Second Cycle with Ø.063 pin Third Cycle with Ø.0ꢀ9 pin
Ins. Force Ext. Force Ins. Force Ext. Force Ins. Force Ext. Force
18N
6N
22N
7N
3N
2N
(Insertion/Extraction Forces are in Newtons and measured with polished
steel gage pins having elliptical shaped tips).
0434-0-15-XX-03-XX-10-0
Press-fit in .106 mounting hole
ORDER CODE: XXXX - X - 1X - XX - XX - XX - XX - 0
BASIC PART #
SPECIFICATIONS
SHELL MATERIAL:
Brass Alloy 360, 1/2 Hard
SPECIFY SHELL FINISH:
SPECIFY CONTACT FINISH:
01 200μ” TIN/LEAD OVER NICKEL
80 200μ” TIN OVER NICKEL (RoHS)
15 10μ” GOLD OVER NICKEL (RoHS)
01 200μ” TIN/LEAD OVER NICKEL
80 200μ” TIN OVER NICKEL (RoHS)
27 30μ” GOLD OVER NICKEL (RoHS)
CONTACT MATERIAL:
Beryllium Copper Alloy 172, HT
DIMENSION IN INCHES
TOLERANCES ON:
LENGTHS:
DIAMETERS: .002
ANGLES: 2ꢁ
.00ꢀ
SELECT CONTACT
#03 or #42 CONTACT (DATA ON PAGE 22ꢀ)
RoHS
2002/95/EC
www.mill-max.com
516-922-6000
157