Series F40
Thru-Hole .040 [1.02] Female DIP Strips
FEATURES:
• This female DIP strip is used in conjunction with Aries’ Shorting
Plug SP200, available separately, for your
programming needs.
• ”Break” feature allows strips to be cut to the number of positions
desired.
SPECIFICATIONS:
• Body material is black UL 94V-0 Glass-filled 4/6 Nylon.
• Pin body is Brass Alloy 360 1/2 hard per UNS C36000 ASTM-
B16-00.
• Pin body plating:
-10 = 200μ [5.08μm] min.Tin per ASTM B545 Type 1 over 100μ
[2.54μm] min. Nickel per SAE-AMS-QQ-N-290.
-10TL = 200μ [5.08μm] min. 93/7 Tin/Lead per MIL-P-81728
over 100μ [2.54μm] min. Nickel per SAE-AMS-QQ-N-290.
• 4-fingered collet contact is Beryllium Copper Alloy per
UNS C17200 ASTM-B194-01.
• Collet contact plating is 30μ [.76μm] min. Gold per
MIL-G-45204 over 50μ [1.27μm] min. Nickel per SAE-AMS-QQ-
N-290.
Note: Aries specializes in custom design and production. In addition to the
standard products shown on this page, special materials, platings, sizes, and
configurations can be furnished, depending on quantities. Aries reserves the
right to change product specifications without notice.
ORDERING INFORMATION
XX - F40 - 10 XX
• Contact current rating=8 Amps.
• Operating temperature= -67° to 221°F [-55° to 105°C].
• Insertion Force=240 grams/pin; Withdrawal Force=130
grams/pin; Normal Force=210 grams/pin; based on a .040
[1.02] diameter test lead.
• Accepts leads .032-.047 [.81-1.19] in diameter, .130-.180 [3.30-
4.56] long.
Plating Option:
No. of Pins:
TL = Tin/Lead
2 - 20 (even # only)
Ex. 02 = 2 pins
14 = 14 pins
Series
MOUNTING CONSIDERATIONS:
• Suggested PCB hole size=.081 ± .002 [2.03 ± .05] dia.
Tin Plating
CONTACT DETAIL
All tolerances ± .005 [.13]
unless otherwise specified
ALL DIMENSIONS: INCHES [MILLIMETERS]
Consult Data Sheet No.
16007 for thru-hole
male DIP strips.
Mates with Aries’ Shorting
Plugs, Part No. SP200.
Consult Data Sheet No.
16009 for details.
Bristol, PAJ USA
TEL: (215) 781-9956
FAX: (215) 781-9845
16008
REV. E
http://www.arieselec.com • info@arieselec.com
abc
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED