Omni L1A-DC — Speed control for DC fans
martFan Omni L1A is a medium power DC
control designed to be used with 12 or 24
S
VDC fans with power ratings up to 38
Watts. It operates in a linear mode applying a
smooth DC voltage to the fans for minimum
noise. Omni L1A is available for both Closed-
Loop (temperature regulating) and Open-Loop
(temperature compensating) applications. It
includes a temperature alarm, triggered if the
sensor temperature reaches 10°C above the
Control Temperature. Omni L1A is compatible
with sensors P1 through P9 shown on page 34.
1.69
(42.9)
1.31
(33.4)
0.19
(4.8)
0.88
(22.4)
For additional information see:
page 13 Design Considerations
page 34 Sensors
FEATURES
• Wide supply voltage range (11.5 to 30 VDC)
• Noise reduction 15 dB(A) or more at idle speed
• Supplied w ith temperature alarm from transistor
open collector. Will sink at least 20 mA above alarm
trigger temperature
• 70°C maximum operating temperature
0.156 D(4)
(3.96)
SPECIFICATIONS
Full Speed/
Idle Speed
Temperatures
Maximum Watts
to Fans3
Control Temperature
Supply
Voltage
Range
Air
P3 Surface
200 ft/Min
Still Air
Part No.
Type
Sensor
Sensor
018L135A
018L140A
35°C
40
74°C
80
Closed-Loop1
NA
11.5-30 VDC
11.5-30
38 Watts
38
20 Watts
Open-Loop2
018L135PA
H104
20
N/A
N/A
35°C/23°C
Hardware Pack
1For sensor installed near equipment exhaust.
2For sensor installed at equipment air inlet.
3Air Temperature of 70°C or less. See page 13 for derating above 70°C.
U.S. Patents 4,659,290, 4,722,699 and 5,364,026
CONTROL
RESOURCES
INCORPORATED
E-mail: sales@controlres.com
■
Web: w w w.controlres.com
30