ZY1015 15A No-Bus POL Data Sheet
3V to 14V Input • 0.5V to 5.5V Output
Member of the
Family
Features
•
RoHS lead free and lead-solder-exempt products are
available
•
•
•
•
•
•
•
Wide input voltage range: 3V–14V
High continuous output current: 15A
Wide programmable output voltage range: 0.5V–5.5V
Active digital current share
Output voltage margining
Overcurrent and overtemperature protections
Overvoltage and undervoltage protections, and Power
Good signal tracking the output voltage setpoint
•
•
Programmable power-up delay
Applications
Tracking during turn-on and turn-off with guaranteed
slew rates
•
Low voltage, high density systems with
Intermediate Bus Architectures (IBA)
•
•
Sequenced and cascaded modes of operation
•
Point-of-load regulators for high performance DSP,
FPGA, ASIC, and microprocessor applications
Single-wire line for frequency synchronization
between multiple POLs
•
•
Industrial computing, servers, and storage
•
•
•
•
•
•
•
Programmable interleave
Broadband, networking, optical, and wireless
communications systems
Programmable feedback loop compensation
Enable control with programmable polarity
Flexible fault management and propagation
Start-up into the load pre-biased up to 100%
Full rated current sink
•
Active memory bus terminators
Benefits
•
•
•
Integrates digital power conversion with intelligent
power management
Real time current and temperature measurements,
monitoring, and reporting
Eliminates the need for external power
management components and communication bus
•
•
•
Small footprint SMT package: 16x32mm
Low profile of 8mm
Completely programmable via pin strapping and
external R and C
Compatible with conventional pick-and-place
equipment
•
•
One part that covers all applications
•
•
Wide operating temperature range
Reduces board space, system cost and
complexity, and time to market
UL60950 recognized, CSA C22.2 No. 60950-00
certified, and TUV EN60950-1:2001 certified
Description
The ZY1015 is an intelligent, fully programmable step-down point-of-load DC-DC module integrating digital power
conversion and intelligent power management. The ZY1015 completely eliminates the need for external
components for sequencing, tracking, protection, monitoring, and reporting. Performance parameters of the
ZY1015 are programmable by pin strapping and external resistor and capacitor and can be changed by a user at
any time during product development and service without a need for a communication bus.
REV. 1.2 MAR 14, 2007
www.power-one.com
Page 1 of 17