ZSSC3154
Automotive Sensor Signal
Conditioner with Dual Analog Output
Datasheet
Benefits
Brief Description
•
•
•
Bridge sensor signal validation for safety
applications via two antivalent analog outputs or
via half-bridge sensor measurement output
The ZSSC3154 is an integrated circuit for highly
accurate amplification and sensor-specific correction
of a bridge sensor signal. Up to two temperature
sensors can also be read in parallel.
Simultaneous measurement of sensor signals,
including temperature signal for compensation
and for temperature output
The circuitry provides different configurations of the
analog outputs to show two measurement results
simultaneously. This also allows generating a com-
plementary bridge sensor signal, which is often a
requirement in safety-relevant applications.
Efficient use of non-calibrated elements for
bridge sensors and temperature sensors without
external trimming components
•
•
Single-pass end-of-line calibration algorithm
minimizes production costs
The ZSSC3154 can measure and process two exter-
nal temperature sensors to compensate the temper-
ature drift of the bridge sensor signal and to output a
separate temperature signal.
Excellent EMC/ESD robustness and AEC-Q100
qualification
An integrated calibration microcontroller with an on-
chip EEPROM performs the digital compensation of
the sensor offset, the sensitivity, the temperature
drift, and the nonlinearity of a sensor signal.
Available Support
•
•
•
Evaluation Kit
Application Notes
Calculation Tools
The single-pass, digital end-of-line calibration com-
bined with the integrated broken-chip detection sup-
ports automatic and highly efficient mass production.
Physical Characteristics
•
•
•
•
•
•
•
Supply voltage: 4.5 to 5.5V
Features
Maximum supply voltage: 7.7V
•
•
•
Differential bridge sensor input
Input span: 1.8 to 267mV/V
Half-bridge sensor or temperature sensor input
ADC resolution: 14 bit
Digital compensation of offset, gain, nonlinearity,
and temperature dependency
Output resolution: > 12 bit from 10% to 90%
Operating temperature range: -40°C to 150°C
Package: QFN32 (5x5mm; wettable flank) or die
•
•
•
Two analog outputs; behavior programmable by
EEPROM configuration
Sequential analog output mode provides two
measurement values at one output pin
ZSSC3154 Basic Circuit
On-chip diagnostic and safety features including
sensor connection diagnostic and broken-chip
detection
DFBH
VTN2
VDDA
VSSA
SDA
SCL
VTN1
•
•
2 EEPROM words for arbitrary user data
Multiple configurable output options
VBR_T
VDD
VDDE
AOUT1
AOUT2
VSSE
VCC
AOUT1
AOUT2
GND
VBP
VBR_B
VBN
© 2016 Integrated Device Technology, Inc.
1
January 22, 2016