ZSPM4013B
High Efficiency 3A Synchronous
Buck Converter
Datasheet
Brief Description
Benefits
The ZSPM4013B is
a
DC/DC synchronous
•
•
Increased battery life
switching regulator with fully integrated power
switches, internal compensation, and full fault
protection. The 1MHz switching frequency enables
using small filter components, resulting in reduced
board space and reduced bill-of-materials costs.
Minimal external component count
(3 capacitors, 1 inductor)
•
Inherent fault protection and reporting
Available Support
•
•
The ZSPM4013B utilizes current mode feedback in
normal regulation pulse-width modulation (PWM)
mode. When the regulator is disabled (EN pin is
low), the ZSPM4013B draws less than 10µA quies-
cent current.
Evaluation Kit
Documentation
Physical Characteristics
•
•
Junction operating temperature: -40°C to 125°C
Packaged in a 16-pin QFN (3x3mm)
The ZSPM4013B integrates a wide range of
protection circuitry, including input supply under-
voltage lockout, output voltage soft start, current
limit, VOUT over-voltage, and thermal shutdown.
The ZSPM4013B includes supervisory reporting
through the PG (Power Good) open-drain output to
interface other components in the system.
Related IDT Products
•
•
ZSPM4011B/ZSPM4012B: 1A/2A synchronous
buck converters, available with adjustable out-
put from 0.9 to 5.5V or fixed output voltages at
1.5V, 1.8V, 2.5V, 3.3V, 5.0V
(16-lead 3x3mm QFN)
Features
ZSPM1000: >5A single-phase, single-rail, true
digital PWM controller (24-lead 4x4mm QFN)
•
Output voltage options (depends on order code):
.
.
Fixed output voltages: 1.5V, 1.8V, 2.5V,
3.3V, or 5V with +/- 2% output tolerance
ZSPM4013B Application Circuits
Adjustable output voltage range: 0.9V to
5.5V with +/- 1.5% reference
Adjustable Output
BST
CBST
•
•
•
•
•
Wide input voltage range: 4.5V to 18V
1MHz +/- 10% fixed switching frequency
3A continuous output current
VCC
CBYPASS
VCC
VSW
FB
VOUT
COUT
LOUT
RTOP
RBOT
High efficiency – up to 95%
VOUT
Current mode PWM control with pulse-
frequency modulation (PFM) mode for
improved light load efficiency
10 kΩ
(optional)
EN
EN
PG
PG
•
Voltage supervisor for VOUT reported at the PG
pin
Fixed Output
•
•
Input supply under-voltage lockout
BST
VCC
VCC
CBST
Soft start for controlled startup with no
overshoot
CBYPASS
VOUT
VSW
FB
LOUT
•
Full protection for over-current, over-
temperature, and VOUT over-voltage
COUT
VOUT
•
•
Less than 10µA in Disabled Mode
Low external component count
10kΩ
(optional)
EN
EN
PG
PG
© 2016 Integrated Device Technology, Inc.
1
January 25, 2016