ZSLS7025
Boost LED Driver
Brief Description
Features
Wide application input voltage range: 5V to 100V
(Higher voltage supported. See section 2.1 in the
data sheet.)
The ZSLS7025, one of our ZSLS Family of LED
control ICs, is a constant current boost converter
designed for driving high-brightness LEDs. It is
optimal for driving multiple white LEDs connected
in series so that the LED current is uniform for
better brightness and color control. The wide input
range and high output current enables diverse
industrial, after-market automotive, and consumer
lighting applications.
Constant current output limited only by external
component selection
No loop compensation required
Internal over-voltage protection
Internal over-temperature protection
Brightness control via PWM or DC voltage control
signal input
The ZSLS7025 output current is adjustable via an
external current sense resistor and can deliver
stable constant output current from a few milliamps
up to 2A or higher.
SOP-8 package
Benefits
The ZSLS7025 drives a constant current into the
load. The control loop features a pulse frequency
modulated (PFM) architecture that is inherently
stable and does not need loop compensation.
High efficiency: up to 95%
Minimum bill of materials
Small form-factor package
The ZSLS7025 supports pulse-width modulation
(PWM) or linear voltage dimming, which allows
flexible control of the LED luminance.
Available Support
Demonstration Kit
The ZSLS7025 can operate in applications with a
wide input voltage range from 5V to 100V. An
integrated over-voltage protection (OVP) circuit
protects the system, even under no-load
conditions. The over-voltage protection is
adjustable via external resistors R1 and R2.
Physical Characteristics
Junction temperature: -40°C to 125°C
RoHS compliant
For additional information on our LED driver family,
visit www.zmdi.com/products/led-drivers/
ZSLS7025 Typical Application Circuit
VIN =5 to 100 VDC
L1
D1
CIN
RVDD
ZSLS7025
COUT
LED
VDD
GATE
CS
Q1
R1
String
TOFF
ADJ
FB
CVDD
GND
OVP
RTOFF
RCS
R2
RFB
© 2012 Zentrum Mikroelektronik Dresden AG — Rev. 1.00
All rights reserved. The material contained herein may not be reproduced, adapted, merged, translated, stored, or used without the prior written consent of the copyright owner.
The information furnished in this publication is subject to changes without notice.