350W ATX with 24V industrial PC Power Supply
YP-350J-AA
Features :
Universal AC input / Full range
Built-in active PFC function, PF>0.95
Protections: Short circuit / Overload / Over voltage
Power good and fail signal
FAN speed control function
Power ON-OFF switch with indicator
Forced air cooling by built-in DC fan
100% full load burn-in test
Approvals: UL / CUL / TUV / CB / FCC / CE
2 years warranty
SPECIFICATION
ORDER NO.
YP-350J-AA
SAFETY MODEL NO.
YP-350J
CH1
3.3V
0.3A
9A
CHANNEL
CH2
5V
CH3
12V
0A
CH4
24V
0A
CH5
-5V
CH6
-12V
0A
STANDBY
5VSB
0A
DC VOLTAGE
MINIMUM CURRENT
RATED CURRENT
MAXIMUM CURRENT
0.1A
15A
21A
0A
9A
5A
0.3A
0.3A
0.8A
0.8A
2.0A
14A
15A
5A
2.0A
135W max. For +5V and +3.3V output
OUTPUT
COMBINE LOAD
210W max. For +5V, +3.3V and +12V output
350W continue load
RATED POWER (max.)
RIPPLE & NOISE (max.) Note.2 50mVp-p
50mVp-p
1.0%
120mVp-p
1.0%
150mVp-p
1.0%
100mVp-p
2.0%
120mVp-p
2.0%
50mVp-p
1.0%
LINE REGULATION
LOAD REGULATION
HOLD UP TIME
1.0%
Note.3 5.0%
5.0%
-2.0 ~ +8.0%
-2.0 ~ +8.0%
5.0%
10%
5.0%
10ms min. at full load (Rated current)
100 ~ 264VAC
VOLTAGE RANGE
FREQUENCY RANGE
POWER FACTOR
47 ~ 63Hz
PF>0.95@230VAC
70%
PF>0.98@115VAC
INPUT
EFFICIENCY (Typ.)
AC CURRENT
8.0A / 115VAC 4.5A / 230VAC
INRUSH CURRENT (max.)
LEAKAGE CURRENT
40A / 115VAC
80A / 230VAC
3.5mA / 240VAC
105 ~ 180% rated output power
OVERLOAD
Protection type : Shut down o/p voltage, re-power on to recover
110% ~ 130% of rated voltage for +3.3V, +5V and +12V
Protection type : Shut down o/p voltage, re-power on to recover
All output equipped with short circuit
PROTECTION OVER VOLTAGE
SHORT CIRCUIT
Protection type : Shut down o/p voltage, re-power on to recover
POWER GOOD SIGNAL
The TTL compatible signal out with 100ms to 500ms delay after power set up
The TTL compatible signal will go down at least 1ms before +5V below 4.75V
Power on: PS-ON = "Low" or "<0.8V" ; Power off: PS-ON = "Hi" or ">2V"
-10 ~ +40
FUNCTION
POWER FAIL SIGNAL
PS-ON INPUT SIGNAL
WORKING TEMP.
WORKING HUMIDITY
20 ~ 90% RH non-condensing
-20 ~ +85 , 10 ~ 95% RH
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
0.05% / (0 ~ 50
)
VIBRATION
10 ~ 200Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 approved
I/P-O/P:1.5KVAC
SAFETY STANDARDS
WITHSTAND VOLTAGE
SAFETY &
ISOLATION RESISTANCE
I/P-O/P: 50M Ohms / 500VDC / 25 / 70% RH
Compliance to EN55022 (CISPR22) class B, FCC part 15 Class B
Compliance to EN61000-3-2,-3
EMC
EMI CONDUCTION & RADIATION
(Note 4)
HARMONIC CURRENT
EMS IMMUNITY
MTBF
Compliance to EN61000-4-2,3,4, 5,6,8,11, light industry level, criteria A
100K hrs min.
ATX main power connector * 1ea; +12V power connector * 1ea; Auxiliary power connector * 1ea
Peripheral power connector * 5 ea; Floppy drive power connector * 2 ea
Forced air ventilation by 8cmx8 ball bearing DC fan
171*150*86mm (L*W*H)
CONNECTOR
OTHERS
COOLING
DIMENSION
PACKING
1.6Kg ; 12pcs / 20Kg / CARTON
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Line regulation is measured from low line to high line at rated load.
NOTE
4. Load regulation is measured from 20% to 100% max. Load.
5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name: YP-350J-AA-SPEC 2010-02-25