H Series
Vishay Foil Resistors
New Generation of Secondary Standards Hermetically Sealed High Precision Bulk
Metal® Foil Technology Resistors with TCR of ꢀ ꢁꢁmꢂ/C, Tolerance of ꢃ0ꢃꢃꢄ ꢅ and
Load Life Stability of ꢃ0ꢃꢃꢆ ꢅ (Metrology, Laboratory, Instrumentation, Industrial)
FEATURES
• Temperature coefficient of resistance (TCR):
2 ppm/°C typical (- 55 °C to + 125 °C, + 25 °C
ref.).
For
ultra
high
performances
(instrumentation and metrology) please refer to
the last page
• Resistance range: 5 Ω to 1.84 MΩ (higher or
lower values of resistance available)
• Vishay Foil resistors are not restricted to standard values;
specific “as required” values can be supplied at no extra
cost or delivery (e.g. 1K2345 vs. 1K)
• Power rating: 0.3 W to 2.5 W at + 25 °C (depending on
model - see table 2)
• Tolerance: to 0.001 % (10 ppm)
• Load life stability to 0.002 % (20 ppm) at 25 °C, 2000 h
at rated power
INTRODUCTION
The H series resistors are oil-filled, hermetically sealed ultra
precision resistors and are used as secondary standards for
metrology applications.
• Load life stability can be considerably imꢁroved
The hermetic sealing eliminates the ingress of moisture and
oxygen, while the oil acts as a thermal conductor, thus
eliminating the long-term degradation elements of unsealed
resistors, while at the same time allowing the device to
accept short periods of overload without degradation.
through in-house stabilization
• Shelf life stability: ꢀ ꢁꢁm for at least 6 years
(unaffected by humidity)
• Electrostatic discharge (ESD) up to 25 000 V
• Rise time: 1 ns effectively no ringing
• Thermal stabilization time < 1 s (nominal value achieved
within 10 ppm of steady state value)
• Current noise: 0.010 µVRMS/V of applied voltage (< - 40 dB)
• Thermal EMF: 0.05 µV/°C typical
• Voltage coefficient: < 0.1 ppm/V
Vishay’s Bulk Metal® Foil outperforms all other resistor
technologies available today for applications that require
precision and stability. When combined with the hermetic
sealing and oil filling, the H series resistors become the most
ꢁrecise and stable resistors available.
• Non-inductive: < 0.08 µH
• Non-inductive, non-capacitive design
• Non hot spot design
• Terminal finish available: lead (Pb)-free or tin/lead alloy
• Impervious to harmful environments - oil-filled
• Compliant to RoHS directive 2002/95/EC
• Prototype quantities available in just 5 working days
or sooner. For more information, please contact
foil@vishaypg.com
With accuracies of 0.001 %, a resistance range from 5 Ω
to 1.84 MΩ, and long term shelf life of less than 2 ppm,
these devices are virtually secondary standards that can be
carried in sets for daily or periodic calibration of factory
measurement equipment.
The H series is available with laboratory and metrology
level ꢁrecision and long-term stability with additional
in-house oriented ꢁrocesses such as: chiꢁ stabilization,
sꢁecial TCR ꢁlotting, additional treatments for ultra
stability and sꢁecial ꢁost manufacturing oꢁerations
(PMO)0 (Please refer to the last ꢁage)
• For better performances (values, TCR, tolerance, stability),
please see the HZ series
TABLE 1 - TCR VS. RESISTANCE VALUE
FIGURE 1 - SHELF LIFE - VHA518-11
12K9 VS. QHE
TYPICAL TCR AND MAX0 SPREAD
RESISTANCE
(- ꢆꢆ /C to + ꢄꢀꢆ /C, + ꢀꢆ /C ref0)
VALUE (Ω)
ꢄ
ꢃ09
ꢃ08
ꢃ07
ꢃ06
ꢃ0ꢆ
ꢃ04
ꢃ03
ꢃ0ꢀ
ꢃ0ꢄ
ꢃ
(ꢁꢁmꢂ/C)
100 to < 1M84
50 to < 100
5 to < 50
2
2
2
2.5
3.5
4.5
Note
• For maximum TCR < 1 ppm/°C, see VHP100 and contact
application engineering
- ꢃ0ꢄ
ꢃ
ꢄꢃꢃ ꢀꢃꢃ 3ꢃꢃ 4ꢃꢃ ꢆꢃꢃ 6ꢃꢃ 7ꢃꢃ 8ꢃꢃ 9ꢃꢃ ꢄꢃꢃꢃ
Time (Days)
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63006
Revision: 23-Mar-10
For any questions, contact: foil@vishaypg.com
www.foilresistors.com
1
5秒后页面跳转
英伟达新AI芯片Rubin或提前半年亮相
苹果iPhone 17将全系采用三星/LG显示LTPO OLED面板
三星深化印度制造布局，供应链本地化进程加速
芯擎科技“星辰一号”自动驾驶芯片点亮成功，2025年量产在即
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
