SMR1DmSMR3D
Vishay Foil Resistors
High Precision Bulk Metal® Foil Molded Surface Mount Resistor
with TCR down to ꢀ ꢁꢁpm/C, Flexible Terpinations,
and Load Life Stability of ꢂ0ꢂꢂꢃ ꢄ (ꢃꢂ ꢁꢁp)
FEATURES
Temperature coefficient of resistance (TCR):
2 ppm°C typical (- 55 °C to + 125 °C,
+ 25 °C ref.)
Tolerance: to 0.01 %
Flexible terminations ensure minimal stress
transference from the PCB due to a difference
in thermal coefficient of expansions (TCE)
Any value at any tolerance available within resistance range
Electrostatic discharge (ESD) above 25 000 V
Load life stability: 0.005 % (70 °C, 2000 h at rated power)
INTRODUCTION
The SMRxD is a precision molded surface mountable
resistor offering all the elements of precision; including low
TCR, tight tolerance, long term stability, low noise, low
thermal EMF, and non-measurable voltage coefficient. It
utilizes the Bulk Metal® Foil technology for the resistive
element with its inherent low and predictable TCR and long
term stability. This surface mountable product affords similar
performance to the time tested S series molded through-hole
product.
Resistance range: 5 to 80 k (for higher and lower
values, please contact us)
Power rating: to 600 mW at 70 °C
Non inductive, non capacitive design
Current noise: - 40 dB
Voltage coefficient: < 0.1 ppm/V
Non inductive: < 0.08 µH
Non hot spot design
Terminal finishes available: lead (Pb)-free
tin/lead alloy
The flexible terpinations of this ꢁroduct also reduce
stress transference frop the PCB to the resistor0
Matched sets with TCR tracking are available upon request
Any value available within resistance range (e.g. 1K234)
Prototype samples available from 48 h. For more
information, please contact foil@vishaypg.com
Voltage division with tight tracking < 3 ppm/°C can be
achieved with 2 randoply selected units even with a large
ratio between the two values.
For better performances please review SMRxDZ datasheet
Our Application Engineering Department is available to
advise and make recommendations. For non-standard
technical requirements and special applications, please
contact us.
APPLICATIONS
Military, airborne and space
Precision amplifiers
High precision instrumentation
Medical
Automatic test equipment (ATE)
Industrial
Audio (high end stereo
equipment)
EB application
Pulse application
TABLE 1 - THE SMRxD SERIES IS LISTED
IN THE FOLLOWING DSCC
SPECIFICATIONS
R2
R1
Vin
-
MODEL
SMR1D
SMR3D
DSCC
06020
06021
MIL SPEC
Vout
+
MIL-PRF-55182
MIL-PRF-55182
SMRxD
Measurement instrumentation
TABLE 2 - TOLERANCE AND TCR VERSUS
RESISTANCE VALUE
FIGURE 1 - POWER DERATING CURVE
- 55 °C
+ 70 °C
(- 55 °C to + 125 °C, + 25 °C ref.)
200
175
150
125
100
75
TYPICAL TCR AND
STANDARD
VALUE
MAX0 SPREAD1)
(ꢁꢁpm/C)
TOLERANCE1)
50 to 80 k
20 to < 50
10 to < 20
5 to < 10
0.01 %
0.02 %
0.05 %
0.1 %
2
2
2
2
3
4
6
8
50
25
0
Note
1. Tighter performances are available
- 75
- 25
+ 25
+ 75
+ 125
+ 175
Apbient Tepꢁerature (/C)
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63102
Revision: 23-Mar-10
For any questions, contact: foil@vishaypg.com
www.foilresistors.com
1