ꢀꢀ
ꢀꢀ
(888) IPD-CONVerters
ꢀ
(888) 473-2668
ꢀ
www.ipdconverters.com
XWS SERIES - 150 WATT
DESCRIPTION
FEATURES
XWS DC/DC converters are high-powered converters
which cover a wide range of industrial and general
applications. Available input voltages include 12V, 24V,
40V, and 48V; output voltages are available from 5V to
24V. The XWS features remote sense leads for accurate
point of load regulation, and has short circuit and
overcurrent protection. For dual and triple output high
power solutions, see the XWD and XWT series of
converters, respectively.
• High Power Package
• Wide Input Range
• Trim and Enable Pins
• Remote Sense Pins
• 500V Isolation
• Short Circuit Protection
Efficiency vs. Load (24V Input)
95
90
85
80
75
XWS2415
TECHNICAL SPECIFICATIONS
Input
Voltage Range
12 VDC Nominal
24 VDC Nominal
40 VDC Nominal (Wide Input)
48 VDC Nominal
10 - 20 VDC
18 - 36 VDC
20 - 60 VDC
36 - 72 VDC
10
20
30
40
50
60
70
80
90 100
LOAD %
Input Ripple Current
20% Iin Max.
100% Iin Max.
Reverse Input Current
Efficiency vs. Load (48V Input)
95
90
85
80
75
70
65
Output
Setpoint Accuracy
±1%
±0.2% Vout
±1% Vout
Line Regulation Vin Min. - Vin Max., Iout Rated
Load Regulation Iout Min. - Iout Max., Vin Nom.
Minimum Output Current
10 % lout rated
Dynamic Regulation, Loadstep
Pk Deviation
Settling Time
Voltage Trim Range
25% Iout
4% Vo
500 µs
±10%
110 - 130%
Continuous
All Models
XWS4805
XWS4815
Current Limit Threshold Range, % of Iout Rated
Short Circuit Protection
OVP
10
20
30
40
50
60
70
80
90 100
LOAD %
General
Turn-On Time
10 ms
Remote Shutdown
Switching Frequency
Isolation
TTL And CMOS Compatible, Positive Logic
200 kHz
Notes
Input - Output
500 VDC
Temperature Coefficient
Case Temperature
Operating Range
±0.02%/°C
†
MTBF predictions may vary slightly from model to model.
†† Industrial temp range available
††
-25 To +85°C
Storage Range
-40 To +125°C
105 To 115°C
95%
5 g, 10 - 55 Hz
Consult Factory
Consult Factory
15.4 oz
Specifications typically at 25°C, normal line, and full load, unless otherwise stated.
Thermal Shutdown Range
Humidity Max., Non-Condensing
Vibration, 3 Axes, 5 Min Each
MTBF† (Bellcore TR-NWT-000332)
Safety
Soldering Conditions: I/O pins, 260°C, ten seconds; fully compatible with
commercial wave-soldering equipment.
Safety: Agency approvals may vary from model to model. Please consult factory
for specific model information.
Weight (Approx.)
C48