XTH, XTK, XTL, XTM, XTV
www.vishay.com
Vishay
Wet Tantalum Capacitors
Cylindrical Body, Hermetically Sealed
FEATURES
• High temperature
• High voltage
Available
Available
• High capacitance
• Withstands high frequency vibration to 2000 Hz
• Hermetically sealed
• Long shelf life
• DSCC drawings 04032 and 04033
• Various termination options: Standard 100 % nickel
(RoHS compliant), tin/lead (Sn/Pb) available
PERFORMANCE CHARACTERISTICS
Operating Temperature: -55 °C to +175 °C with proper
derating
• Mounting: Arrays and assemblies
Voltage Range: 8 VDC to 630 VDC at 85 °C
Reverse Voltage: None
• Material categorization: For definitions of compliance
please see www.vishay.com/doc?99912
Capacitance Range: 2 μF to 2200 μF
Note
*
This datasheet provides information about parts that are
RoHS-compliant and/or parts that are non-RoHS-compliant. For
example, parts with lead (Pb) terminations are not RoHS-compliant.
Please see the information/tables in this datasheet for details.
Tolerance Range:
-15 % to +50 % (standard for XTK, XTM, XTV)
-15 % to +75 % (standard for XTH, XTL)
20 % (special order)
ORDERING INFORMATION
XTV
126
T
630
P
0
A
MODEL CAPACITANCE CAPACITANCE DC VOLTAGE
CASE CODE
INSULATION
TERMINAL
CONFIGURATION
RoHS
COMPLIANT
CODE
TOLERANCE
RATING
XTH
XTK
XTL
XTM
XTV
This is
T = -15 %
to +50 %
This is
P = Polar
(case negative)
R = Reverse
polarity
0 = Uninsulated
(standard)
See Styles
Blank = 100 %
nickel (RoHS
compliant design)
8 = 60/40 solder
(tin/lead
expressed
in picofarads.
The first two
digits are
expressed
(XTK, XTM,
XTV standard)
U = -15 %
to +75 %
in volts. To
complete the
three-digit
block, zeros
precede the
voltage rating.
4 = Teflon
(+175 °C limit)
(case positive)
the significant
figures. The
third is the
number of
termination
(XTH, XTL
standard)
M = 20 %
design)
zeros to follow. (special order)
Note
•
For styles, terminal configurations, mounting methods and hardware, please see pages following Standard Ratings table
DIMENSIONS in inches [millimeters]
XTH-XTL-XTV
XTK-XTM
2.250
0.250
2.250
0.250
H
D
H
(+)
(-)
(+)
Case
negative
D
0.281
0.062
0.281
0.062
5/16 1/16
TYPE
XTK - XTM
XTL - XTH
XTV
D
H
0.656
0.875
1.125
0.438 to 1.781
0.540 to 4.062
0.600 to 2.810
Note
•
For insulated parts, add 0.015" [0.38] to the diameter. The insulation shall lap over the ends of the capacitor body.
Revision: 07-Feb-14
Document Number: 42077
1
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000