1 WATT/900 MHZ
OEM RF MODULES
XTEND® OEM
RF MODULES
Long-range wireless modules enable communication from UART serial data with
peer-to-peer, point-to-multipoint, repeater and DigiMesh® networking topologies
The XTend OEM RF module provides unprecedented range in
a low-cost wireless data solution. The module is easy to use,
requires minimal power, provides reliable delivery of critical
data between devices and is now available in the even smaller
Digi XBee® Surface Mount form factor to save valuable PCB
space.
that use 900 MHz as a license-free band. The XTend module is
approved for use in the United States, Canada, Australia and
other countries (contact Digi for a complete listing).
Innovations stamped in its design enable the XTend module
to supply two- to eight-times the range of other modules
operating within the unlicensed 900 MHz frequency
The XTend module utilizes FHSS (Frequency Hopping Spread
Spectrum) agility to avoid interference by hopping to a new
frequency on every packet transmission or re-transmission.
Its transmit power is soꢀware adjustable from 100 mW to
1 W—the maximum output power allowable by governments
band. The range gained by OEMs and integrators is due to
proprietary technologies embedded into each module,
including superior RX (receiver) sensitivity, interference
immunity, modulation/demodulation techniques and others.
BENEFITS
APPLICATION EXAMPLE
–
–
Indoor/urban range up to 1000 feet*
Outdoor line-of-sight range up to 40 miles*
(with high gain antenna)
Ethernet
–
–
Outstanding receiver sensitivity (-110 dBm @ 9600 bps)
PC INSIDE
SHIPPING YARD
Peer-to-peer, point-to-multipoint, repeater and
DigiMesh networking topologies
XTEND®
RF MODEM
–
–
Adjustable power output from 100 mW to 1 W;
up to 4 W EIRP (with 6 dBi antenna)
Available in the XTend and Digi XBee SMT form factors
RELATED PRODUCTS
Embedded into
GPS/Datalogger
XTEND®
900 MHZ MODULE
XTend®
ConnectPort® Digi XBee® 900HP Digi XBee-PRO®
RF Modem 900HP Module
XCTU
RF Modem
X2