Document 646-1
Power Inductors
–
XPL2010 Series
•ꢀUtra-miniature,ꢀmagneticallyꢀshieldedꢀpowerꢀinductors
•ꢀVeryꢀlowꢀDCRꢀandꢀexcellentꢀcurrentꢀhandling.
•ꢀSoftꢀsaturationꢀmakesꢀthemꢀidealꢀforꢀVRM/VRDꢀapplications.
Designer’s Kit C4±8 contains 5 each of all values
Core material Composite
Core and winding loss See www.coilcraft.com/coreloss
Weight 20 mg
Terminations RoHS compliant tin-silver-copper over tin over nickel
over silver. Other terminations available at additional cost.
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 2000/7″reel; 7500/13″ reel Plastic tape: 8 mm wide,
0.23 mm thick, 4 mm pocket spacing, 1.19 mm pocket depth
PCB washing Only pure water or alcohol recommended
Isat (A)5
Irms (A)6
±2°C rise 42°C rise
Inductance2
±±20 (ꢀµ)
DCR nom3
(Ohms)
DCR max3 SRF typ4
Part number1
(Ohms)
(Mµz)
120 drop ±20 drop 320 drop
XPL2010-201ML_
XPL2010-331ML_
XPL2010-501ML_
XPL2010-681ML_
XPL2010-821ML_
0.20
0.33
0.50
0.68
0.82
0.024
0.031
0.040
0.057
0.068
0.027
0.035
0.045
0.063
0.075
408
309
218
152
132
2.80
1.90
1.80
1.55
1.25
3.45
2.75
2.35
1.95
1.65
3.75
3.05
2.64
2.19
1.90
2.2
1.9
1.7
1.5
1.3
2.8
2.6
2.3
2.1
1.7
XPL2010-102ML_
XPL2010-152ML_
XPL2010-222ML_
XPL2010-332ML_
XPL2010-472ML_
1.0
1.5
2.2
3.3
4.7
0.081
0.105
0.156
0.207
0.336
0.089
0.116
0.173
0.228
0.370
117
80
75
55
40
1.20
1.60
1.30
1.20
0.925
0.750
1.80
1.50
1.35
1.05
0.845
1.1
1.0
0.96
0.79
0.74
1.6
1.4
1.3
1.1
1.0
0.950
0.940
0.700
0.580
XPL2010-682ML_
XPL2010-822ML_
XPL2010-103ML_
XPL2010-104ML_
XPL2010-224ML_
6.8
8.2
10
100
220
0.421
0.457
0.555
8.48
0.463
0.503
0.611
9.27
33
30
28
11
7.1
0.450
0.440
0.390
0.180
0.122
0.620
0.600
0.525
0.214
0.143
0.725
0.670
0.610
0.232
0.161
0.64
0.55
0.49
0.13
0.086
0.87
0.75
0.66
0.17
0.116
19.2
21.1
1. When ordering, please specify termination and packaging codes:
XPL±212-123MLC
2.ꢀInductanceꢀtestedꢀatꢀ100ꢀkHz,ꢀ0.1ꢀVrms,ꢀ0ꢀAdc.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 4395A or equivalent.
5. DC current at which the inductance drops the specified amount from its
value without current.
6. Current that causes the specified temperature rise from 25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Termination:E = RoHS compliant tin-silver-copper over tin over nickel
over silver.
Special order: S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter C instead.
D = 13″ machine-ready reel. EIA-481 embossed plastic
tape. Factory order only, not stocked (7500 parts per
full reel).
Document 646-1 Revised 03/28/11