XL Datasheet
Absolute Maximum Ratings
Stresses above the ratings listed below can cause permanent damage to the device. These ratings, which are standard values for IDT
commercially rated parts, are stress ratings only. Functional operation of the device at these or any other conditions above those
indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended
periods can affect product reliability. Electrical parameters are guaranteed only over the recommended operating temperature range.
Table 4. Absolute Maximum Ratings
Item
Rating
V
-0.5 to +5.0V
-0.5V to V + 0.5V
DD
E/D
DD
OUT
-0.5V to V + 0.5V
DD
Storage Temperature
-55°C to 125°C
Maximum Junction Temperature 125°C
Core Current
65mA maximum
Theta J
75.9 °C/W
48.6°C/W
89.6 °C/W
54.3 °C/W
94.7 °C/W
66.8 °C/W
JU6
JS6
5.0 × 3.2 × 1.2 mm
JX6
A
7.0 × 5.0 × 1.3 mm
3.2 × 2.5 × 1.0 mm
Theta J
B
ESD Compliance
Table 5. ESD Compliance
Human Body Model (HBM
Machine Model (MM)
1000V
150V
Mechanical Testing
Table 6. Mechanical Testing
Parameter
Test Method
Drop from 75cm to hardwood surface–3 times.
Mechanical Shock
Mechanical Vibration
High Temperature Burn-in
Hermetic Seal
10–55Hz, 1.5mm amplitude, 1 minute sweep; 2 hours each in 3 directions (X, Y, Z).
Under power at 125°C for 2000 hours.
2
He pressure: 4 ±1kgf/cm 2 hour soak.
Solder Reflow Profile
tP
10 seconds Max within
5°C of 260°C peak
260°C
Ramp up 3°C/s Max
Ramp down not
to exceed 6°C/s
225°C
180°C
50 ±10
seconds
above 225°C
reflow area
120 ±20 seconds
in pre-heating
area
160°C
25°C
400 seconds MAX from +25°C to 260°C peak
©2018 Integrated Device Technology, Inc.
4
September 7, 2018