XC9505Series
ETR0705_005
2ch. Step-Down / Inverting DC/DC Controller IC
☆GreenOperation-Compatible
■GENERAL DESCRIPTION
XC9505 series are PWM controlled, PWM/PFM switching 2 channel (step-down and inverting) DC/DC controller ICs. With 0.9V of
internal standard voltage supply, and using externally connected components, the output 1 voltage (step-down DC/DC controller)
can be set freely within a range of 0.9V to 6.0V. Since output 2 (inverting DC/DC controller) has a built-in 0.9V reference voltage
(accuracy
±2%), a negative voltage can be set with the external components.
With a 180 kHz frequency, the size of the external components can be reduced. Switching frequencies of 300 kHz and 500 kHz are
also available as custom designed products.
The control of the XC9505 series can be switched between PWM control and PWM/PFM automatic switching control using external
signals. Control switches from PWM to PFM during light loads when automatic switching is selected and the series is highly
efficient from light loads through to large output currents. Noise is easily reduced with PWM control since the frequency is fixed.
The series gives freedom of control selection so that control suited to the application can be selected. Soft-start time is internally set
to 10ms (output1) which offers protection against rush currents and voltage overshoot when the power is switched on.
■FEATURES
■APPLICATIONS
●PDAs
2 ch. DC/DC Controller (Step-Down / Inverting)
<Output 1: Step-Down DC/DC Controller>
Output Voltage Range
Output Current
: 0.9V ~ 6.0V (set by FB1 pin)
: More than 1000mA
(VIN=5.0V, VOUT=3.3V)
: 100%
●Palm top computers
●Digital cameras
Maximum Duty Cycle
●Various power supplies
Soft-Start Internally Set-Up
<Output 2: Inverting DC/DC Controller>
Output Voltage Range
Output Current
: -30V ~ 0V (set by FB2 pin)
: More than -100mA
(VIN=5.0V, VOUT= - 3.3V)
: 80% (TYP.)
Maximum Duty Cycle
<Common>
Operating Voltage Range : 2.0V ~ 10.0V
Oscillation Frequency
: 180kHz (±15%)
* 300kHz, 500kHz custom
Control Method
Stand-by Function
Packages
: PWM or PWM/PFM Selectable
: 3.0μA (MAX.)
: MSOP-10, USP-10
■TYPICAL APPLICATION CIRCUIT
■TYPICAL PERFORMANCE
CHARACTERISTICS
<XC9505B092A Input: 2 cell, VOUT: 3.3V, VOUT: - 5.0V >
●Efficiency vs. Output Current
L1:22uH
SD2
CDRH5D28
:MA2Q737
Tr1:Pch MOSFET
XP162A12A6P
Tr2:Pch MOSFET
XP162A12A6P
VOUT1:3.3V
VOUT2:-5.0V
CIN
:47uF
SD1
:MA2Q737
VIN
=5.0V
L2:22uH
CDRH5D28
CFB2
:62pF
RFB11
:200kΩ
RFB21
:27kΩ
CL2:47uF
CFB1
CL1:47uF
:62pF
1 EXT1/ EXT2/ 10
2 VDD
3 FB1
GND
FB2
9
8
VPWM1
VNE1
4 PWM1 PWM2 7
5 EN1 EN2 6
VPWM2
VNE2
RFB12
RFB22
:75kΩ
:11kΩ
1/50