☆GO-Compatible
■APPLICATIONS
◆Input Voltage Range : 2.2~10.0V
◆Output Voltage Range : 1.5~6.0V(±2.5%)
◆Oscillator Frequency : 300kHz(±15%)
◆Maximum Duty Ratio : 100%
●Electronic information organizers
●Palmtops
●Cellular and portable phones
●Portable audio systems
●Various multi-function power supplies
◆High Efficiency
: 92%
◆PWM/PFM Switching Control (XC6366)
◆SOT-25 Package
■GENERAL DESCRIPTION
■FEATURES
The XC6365/66 series are multi-functional step-down DC/DC
converters with built-in high speed, low ON resistance drivers. An
output current of more than 1A is possible using an externally
connected transistor, coil, diode and capacitor.
Input Voltage Range : 2.2V~10V (VOUT type)
Output Voltage Range : 1.5V ~ 6.0V programmable in
100mV steps (±2.5%)
Oscillation Frequency : 300kHz (±15%)
Output voltage is programmable in 100mV steps between 1.5V to
6.0V (VOUT) (±2.5% accuracy). Further, with 1.0V of standard
voltage supply internal and using externally connected
components, output voltage can be set up freely (FB).
With a 300kHz switching frequency, the size of the external
components can be reduced.
:
Custom products for 180, 500kHz
Output Current
High Efficiency
Stand-by Capability : ISTB=0.5μA (MAX.)
Soft-start time set-up externally type possible
Internally set-up output voltage type possible (VOUT
: More than 1.0A
(VIN=5.0V, VOUT=3.0V)
: 92% (TYP.)
Control switches from PWM to PFM during light loads with the
XC6366 (PWM/PFM switchable) and the series is highly efficient
from light loads to large output currents.
)
In relation to soft-start time, both internally set-up 10msec types
(A,B) and external resistor or capacitor regulated types (C,D) are
available.
Externally set-up outut voltage type possible (FB)
Package : SOT-25
During stand-by time (CE pin "Low" ), current consumption is
reduced to less than 0.5 A.
μ
With U.V.L.O internal, the external Tr. will be forcibly switched off if
used below the stipulated voltage.
■TYPICAL PERFORMANCE
■TYPICAL APPLICATION CIRCUIT
CHARACTERISTICS
553