0
R
Virtex-5 Family Overview
LX, LXT, and SXT Platforms
0
0
DS100 (v3.0) February 2, 2007
Advance Product Specification
General Description
The Virtex™-5 family provides the newest most powerful features in the FPGA market. Using the second generation
ASMBL™ (Advanced Silicon Modular Block) column-based architecture, the Virtex-5 family contains four distinct platforms
(sub-families), the most choice offered by any FPGA family. Each platform contains a different ratio of features to address the
needs of a wide variety of advanced logic designs. This overview contains detailed information about the LX, LXT, and SXT
platforms. In addition to the most advanced, high-performance logic fabric, Virtex-5 FPGAs contain many hard-IP system
level blocks, including powerful 36-Kbit block RAM/FIFOs, second generation 25 x 18 DSP slices, SelectIO™ technology
with built-in digitally-controlled impedance, ChipSync™ source-synchronous interface blocks, system monitor functionality,
enhanced clock management tiles with integrated DCM (Digital Clock Managers) and phase-locked-loop (PLL) clock
generators, and advanced configuration options. The LXT and SXT devices also contain power-optimized high-speed serial
transceiver blocks for enhanced serial connectivity, a PCI Express™ compliant integrated Endpoint block, and tri-mode
Ethernet MACs (Media Access Controllers). These features allow advanced logic designers to build the highest levels of
performance and functionality into their FPGA-based systems. Built on a 65-nm state-of-the-art copper process technology,
Virtex-5 FPGAs are a programmable alternative to custom ASIC technology. Most advanced system designs require the
programmable strength of FPGAs. Virtex-5 FPGAs offer the best solution for addressing the needs of high-performance
logic designers, high-performance DSP designers, and high-performance embedded systems designers with
unprecedented logic, DSP, hard/soft microprocessor, and connectivity capabilities. The Virtex-5 LXT, SXT, and FXT
platforms include advanced high-speed serial connectivity and link/transaction layer capability.
Summary of Virtex-5 Features
•
Four platforms LX, LXT, SXT, and FXT
•
High-performance parallel SelectIO technology
-
-
Virtex-5 LX: High-performance general logic applications
Virtex-5 LXT: High-performance logic with advanced
serial connectivity
-
-
1.2 to 3.3V I/O Operation
Source-synchronous interfacing using ChipSync
technology
-
-
Virtex-5 SXT: High-performance signal processing
applications
Virtex-5 FXT: High-performance embedded systems
-
-
-
Digitally-controlled impedance (DCI) active termination
Flexible fine-grained I/O banking
High-speed memory interface support
•
•
Cross-platform compatibility
•
•
Advanced DSP48E slices
-
LXT, SXT, and FXT devices are footprint compatible in
the same package
-
-
-
-
-
25 x 18, two’s complement, multiplication
Optional adder, subtracter, and accumulator
Optional pipelining
Optional bitwise logical functionality
Dedicated cascade connections
Most advanced, high-performance, optimal-utilization,
FPGA fabric
-
-
-
-
-
Real 6-input look-up table (LUT) technology
Dual 5-LUT option
Improved reduced-hop routing
64-bit distributed RAM option
SRL32/Dual SRL16 option
Flexible configuration options
-
-
SPI and Parallel FLASH interface
Multi-bitstream support with dedicated fallback
reconfiguration logic
•
•
Powerful clock management tile (CMT) clocking
-
Auto bus width detection capability
-
Digital Clock Manager (DCM) blocks for zero delay
buffering, frequency synthesis, and clock phase shifting
PLL blocks for input jitter filtering, zero delay buffering,
frequency synthesis, and phase-matched clock division
•
•
Integrated Endpoint blocks for PCI Express (LXT/SXT)
-
-
-
Compliant with the PCI Express Base Specification 1.1
x1, x2, x4, or x8 lane support per block
Works in conjunction with RocketIO™ transceivers
-
36-Kbit block RAM/FIFOs
Tri-mode 10/100/1000 Mb/s Ethernet MACs
(LXT/SXT)
-
-
-
True dual-port RAM blocks
Enhanced optional programmable FIFO logic
Programmable
-
RocketIO transceivers can be used as PHY or connect to
external PHY using many soft MII (Media Independent
Interface) options
·
·
True dual-port widths up to x36
Simple dual-port widths up to x72
-
-
Built-in optional error-correction circuitry
Optionally program each block as two independent
18-Kbit blocks
•
•
RocketIO GTP transceivers 100 Mb/s to 3.2 Gb/s
(LXT/SXT)
System Monitoring capability on all devices
•
•
•
65-nm copper CMOS process technology
1.0V core voltage
High signal-integrity flip-chip packaging available in
standard or Pb-free package options
-
-
-
On-chip/Off-chip thermal monitoring
On-chip/Off-chip power supply monitoring
JTAG access to all monitored quantities
© 2006 - 2007 Xilinx, Inc. All rights reserved. All Xilinx trademarks, registered trademarks, patents, and disclaimers are as listed at http://www.xilinx.com/legal.htm.
PowerPC is a trademark of IBM, Inc. All other trademarks are the property of their respective owners. All specifications are subject to change without notice.
DS100 (v3.0) February 2, 2007
www.xilinx.com
Advance Product Specification
1
5秒后页面跳转
L6234手册解读：引脚信息、电气参数
解读BSP135H6327资料：电气参数及替换型号推荐
FDG6302P资料解析：电气参数、产品特性
SBAV99WT1G资料手册：参数信息、产品特性、替代型号推荐
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
